Q-See QSDT16PCRC, QSDT8PCRC, QSDT8PCDP PTZ Operation, Serial Ports Setup, Preset and Group Select

Page 26

SERIAL PORTS SETUP

Users should first enable the P.T.Z control function of a camera and then select a port number in P.T.Z Protocol Setup. The values entered for each parameter should match those on the camera itself.

Port - Set the port number.

 

Baud Rate - Set P.T.Z device Baud Rate to

 

match setting on camera. The default

 

value is 9600.

 

Data Bits - Default value is 8.

 

Parity - Odd and even parity bit, default

 

None.

PICTURE 8-3

Stop Bits - The Default value is 1.

 

8.2 PTZ OPERATION

The PTZ Controls can be accessed directly from the Main Display Interface by clicking on the PTZ Control icon on the right side of the display. This will replace the buttons and

functions on the right side of the display with the PTZ controls.

PICTURE 8-4

You can control P.T.Z. devices by clicking on its display. The selected camera channel will be highlighted in red indicating that it is ready to be controlled.

Focus, Zoom and Iris (light level) are adjusted by the use of the + and - keys to either side.

A PTZ function (direction, zoom, etc.) will continue as long as the user is holding down the left mouse button while the cursor is over the button or until it reaches a physical limit.

PICTURE 8-5

Clicking on Set PTZ speed allows you to adjust the Pan Speeds, Tilt Speeds, Focus Speeds and Zoom Speeds for all connected PTZ cameras.

Pan Speed - Set horizontal rotating speed. Tilt Speed - Set vertical rotating speed. Focus Speed - Set camera focus speed.

Zoom Speed - Set zoom in/ zoom out speed.

Click and a pop-up window will appear; users can choose different presets or group sets.

PRESET AND GROUP SELECT

Click to set Preset point and change Preset point name. Every Group includes multiple Preset points. If users select preset1, preset2 and preset3 for group1, preset1, preset2 and preset3 will be automatically accessed in sequence after users select group1 for auto scout.

Preset

 

Click

, and a pop-up will

appear allowing you to configure settings for a Preset.

Dwell- Set the dwell time for a Preset. The camera will wait this long before moving on to the next action.

PICTURE 8-6

PICTURE 8-7

PICTURE 8-8

PICTURE 8-9

CHAPTER 8 P.T.Z. CAMERAS

50

51

Image 26
Contents Model QSDT8PCRC Model QSDT8PCDP Model QSDT16PCRC About this Manual Table of Contents Accessing the DVR Using Internet Explorer Configuring Router for Remote AccessDdns Dynamic Domain Name Service System SetupFeatures and Specifications IntroductionSystem Requirements System Requirements and Chapter SpecificationsSystem Specifications QSDT8PCRP & QSDT8PCDPQSDT8PCDP Card Connecting Multiple CardsVideo Capture Card AudioQSDT8PCRP Card Video and Audio PIN LayoutQSDT16PCRP Card VIDEO2 VIDEO3 VIDEO4 VIDEO5Connecting a PTZ Camera PTZ Camera RS485 to Serial AdapterSoftware Installing the SuperdvrInstalling the Software User Account Control for Windows Vista and Windows Other Controls Basic OperationDisplay Control Panel RECORDING, Playback and Chapter Record Search Recording ConfigurationBasic Configuration Recording Modes Recording to Hard Drive Record Search and Playback Record SearchPlayback File BackupOther Functions Deleting Recorded Files Capture PicturesSystem Settings Digital Image ZoomSystem LOG in and Reboot Basic ConfigurationCamera Display Settings Video ConfigurationAlarm Record Alarm ConfigurationAlarm Types Triggered ActionsAuto Mail MAP ConfigurationMail Setup Interface User Rights User ConfigurationUsing the E-MAP Z. Cameras P.T.Z Control ConfigurationProtocol Setup ADD UserPreset Serial Ports SetupPreset and Group Select PTZ OperationPlayback Configuring Router for Remote AccessRemote Surveillance Remote Live SurveillanceIf Multiple Routers are Detected Part 2 Determine the Number of Routers on the NetworkGo to Part 3 Simple Port Forwarding PartList Test that the ports now work Part 4 Setting UP DMZ in Router Setting UP Ddns Ddns Dynamic Domain Name ServiceAccessing the DVR Using Internet Explorer User Account Control for Windows Vista and WindowsSetting Up ActiveX Control Click on the Security TabObtained in .3 Ddns Dynamic Domain Name Service into the addressClick OK Accessing the Internet Explorer Client IconRecord Playback and Control Remote BackupRemote Playback Surveillance & Playback Server PC Setup System SetupAlarm Setup Live audioRecord Configuration Camera SetupAlarm Configuration Schedule ConfigurationStorage Disk Motion ConfigurationMail Configuration Mobile Surveillance P.T.Z ConfigurationSerial Port Setup Windows Mobile PROSymbian Mobile SurveillanceInstalling Through the Iphone or Ipad Iphone and IpadInstalling Through PC or Macintosh Computer Live View Interface Operating Instructions for IPHONE/IPADMain Menu Record Playback Interface Configuration InterfaceImage View Interface Server List InterfaceAndroid Software InstallationLogin Operating SupercamRecord Playback Live ViewImage View Frequently Asked Questions AppendixFrame rate Resolution Picture quality Used Space MB Hour 100 101 On Main Computer where DVR Card Installed Installation InstructionsTroubleshooting Quick Start InstructionsFunction Tree System Configuration Tree ConfigIE Client Function Tree Remote Playback Function Tree See Products See Product WarrantyLiability Exclusions 110 111
Related manuals
Manual 104 pages 32.84 Kb Manual 104 pages 32.87 Kb