Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
SuperDVR & H.264 Series Cards User Manual
HDD space shortage alarm.
1.Video Loss
Users can select alarm output for this option. For example, users select alarm_out1 and alarm_out3 for video loss. Then video loss of any channel will trigger alarm_out1, alarm_out3 to show a red light in the Alarm output status panel (refer to
2.Disk Alarm
When HDD available space is less than the set value (see
3.Sensor
Sensor 1: If users have mounted sensors, when the sensors have been activated, it will trigger the selected output alarms.
Sensor 2 - Sensor 16: Two QSPD4116 cards have a maximum of 16 sensors.
4.Motion
Motion 1: Users can set the output of motion detection alarm by different alarms and remote alarm.
Motion 2 - Motion 16: 32CH card has maximum 16 motion alarms.
NOTICE: You should choose our additional alarm device board while using two QSPD4116 cards for alarm I/O.
4.5.4 Auto Mail Function
Users can select the
NOTICE: Before you setup this function, make sure the DVR is set to Motion Recording.
Click ‘Auto Mail’ icon on the left top side of alarm configuration page to enter the following area to make Auto Mail setup, refer to
36