Ultratec INTELE-MODEM manual INTELE-MENU Command SET, How to use the commands

THE INTELE–MENU COMMAND SET

This section contains a complete description of each of the Intele–Menu commands. See page 5 for step-by-step instructions for how to make a phone call.

How to use the commands ___________________________________

All commands are entered at the Command Line. When you turn on the Intele–Modem and press the computer’s Escape Key, you’ll see this message on your computer screen:

Press the SPACE bar to use Intele–Menu command set

Pressing the Spacebar tells the modem you want to use Intele–Menu commands. The modem responds by displaying the Command Line on the screen. It looks like this:

Command (Press ? for help):

The modem is waiting for a command from you. It’s also telling you that if you type ? you’ll see the help menu. The help menu is shown below.

======== TELEPHONE FUNCTIONS ================= COMMUNICATION SETTINGS =======

D–Dial telephone			1–Communication code	(AUTOMATIC)
A–Answer telephone			2–BAUDOT speed (45)
H–Hang-up telephone			3–ASCII speed (300)
T–Tone/Pulse dialing	(PULSE)		O–Originate/Answer	(ANSWER)
			F–Full/Half Duplex	(HALF)
========= MESSAGE FUNCTIONS =========			E–Echo ON/OFF (ON)
			I–Hi sensitivity	(OFF)
N–Enter new message
L–List message	( 0 chars)
S–Send message			C–Current communication settings
		Q–Quit to ‘AT’ command mode
======= AUTO-ANSWER FUNCTIONS =======
			====================================
Z–Turn Auto-Answer on
V–View AA message	( 0 chars)		© Copyright ULTRATEC Inc. 1989
M–Enter new AA message
R–Set # of rings	( 0 rings)		Version ITM061694

=============================================================================

Press ENTER to go ONLINE

Command (Press ? for help):

Each letter or number listed on the help menu is a command which will change how the modem operates. Don’t worry, you won’t have to use all the commands every time you make a phone call! After things are set up, most calls won’t need any changes.

THE INTELE-MENU COMMAND SET • 9