Rimage 360i Introduction, Requirements, Software requirements, Operating System requirements

Page 7
Introduction

Introduction

Introduction

This manual provides the information needed to operate the Rimage 360i and identify the parts. To set up and install your Rimage 360i, refer to the Rimage 360i Setup and Installation Guide.

Requirements

Software requirements

The Rimage 360i will operate only with the Rimage 360i Software.

Operating System requirements

The Rimage 360i and software run only on Windows 2000, and Windows XP, and Windows 2003.

Media requirements

You must use discs that are coated with a surface that is designed for inkjet printing. The media that is in Rimage Media Kitsis designed for optimum use in the Rimage 360i.

Ink requirements

The printer will work only with the following printer cartridges.

Description
Rimage Part #

 

 

Black

RB1

 

 

Color

RC1

 

 

Photo

RP1

 

 

 

 

nWarning:

The following cartridge combinations are supported.

Left Position

 

Right Position

 

 

 

Color

 

Black

 

 

 

Color

 

Photo

 

 

 

Color

 

No cartridge

 

 

 

No cartridge

 

Black

 

 

 

ƒInk may be harmful if swallowed.

ƒAvoid contact with eyes.

ƒInk contains nitrites. If ingested, seek immediate medical attention.

ƒKeep out of reach of children.

ƒRefilling ink cartridges may result in damage to the cartridge or printer.

ƒRimage ink cartridges are not licensed for modification.

Important! You can use only Rimage ink cartridges in the Rimage 360i.

110808_C

1

Image 7
Contents Rimage 360i User Guide Page European Headquarters Corporate HeadquartersCD and DVD Recording Software Disclaimer South America RimageNorth America EuropeMaintain the Rimage ContentsContents IntroductionRimage Operating System requirements IntroductionRequirements Software requirementsLabel design requirements Front View Identify the parts of the RimageIdentify the parts of the Rimage Pause button Rimage 360i ButtonsFunctionality Rimage 360i Project Status Indicator PSIImage NameFilter Cover Rear Cover Power Switch Power Cord Port USB Port Rear viewOperate the Rimage Powering on the RimagePausing the Rimage Operate the Rimage1. Open the input door Loading the discs3. Close the input door Navigating to Printing Preferences Accessing Printing Preferences through Windows Start menuAccessing Printer Preferences through CD Designer Select your printing preferencesAdding, editing, or deleting a watermark Setting the print qualityc. Select OK. The Digital Photography Options window closes Setting up color options Adjusting the ink volume used3. Turn Print in Grayscale on or off Standard Area Changing or enabling maskingPrinting on hub with a stacking ring Tip The image below shows a disc with a stacking ringAligning the ink cartridges Printing on hub without a stacking ringTip The image below shows a disc with no stacking ring Checking the ink levels Centering the image on the discMaintain the Rimage General CleaningCleaning the exterior Cleaning the ink cartridge nozzlesReplacing the fan filter Replace Consumablesa. Remove the cartridge and reinsert it Replacing the ink cartridges7. Close the ink cartridge access door c. If the problem persists, replace the cartridgeLearn More Rimage 360i SpecificationsLearn More Technical support and product updatesSafety information Safety precautionsProduct name Rimage Safety testingModel RAS17 Rimage 360i Limited 1 Year Warranty