Operate the Rimage 360i
Operate the Rimage 360i
This section provides the information that you need to produce CDs or DVDs with the Rimage 360i.
Powering on the Rimage 360i
1.To power on the 360i, press the power switch on the rear of the 360i. The Rimage 360i initializes.
2.To power off the 360i, press the power switch again.
Pausing the Rimage 360i
Before you load or unload discs from the Rimage 360i, you must pause it.
1.To pause the 360i, press the pause button once. The 360i pauses. The power LED is amber.
2.To return to normal operation, press the pause button again. The power LED is green.
110808_C | 7 |