Rimage 360i
Label design requirements
The Rimage 360i Software includes a label editor called CD Designer™, which is installed on your system. You can use CD Designer to design your labels.
If you have another software application that you prefer, you can create a label and save it as an Acrobat®(.pdf) file, a .jpg file, or a .tiff file.
Important! Only the Acrobat (.pdf) file can print directly to the Rimage 360i. To create a label with another software application, use the following criteria:
•Color Depth – Save the artwork for the label with the color set to at least 256 colors. A color setting higher than 256 colors is recommended.
•DPI – Use pictures or logos set to 300 DPI (dots per inch).
•Label Design Size – A standard disc is 120mm (4.723”). The hole is 15mm (0.59”). The printable area and hub sizes vary depending on the disc manufacturer.
•Media – The media that is in Rimage Media Kits™ has a hub area of 23 mm and a printable area of 118 mm. On most labels, print settings of 24 mm and 118 mm are recommended.
2 | 110808_C |