Rimage 360i manual Select your printing preferences, Navigating to Printing Preferences

Page 15

Operate the Rimage 360i

Select your printing preferences

Printing Preferences allows you to set up and run your Rimage 360i to produce the best possible label on your discs.

Tip: For additional information about these features, access the online help in Printing Preferences.

Through Printing Preferences, you can:

•Set the print quality

•Adjust the ink volume used

•Change or enable masking

•Printing on hub with a stacking ring

•Printing on hub without a stacking ring

•Center the image on the disc

•Check the ink levels

•Add, edit, or delete a watermark

•Set up color options

•Align the ink cartridges

Navigating to Printing Preferences

You must access the Disc Color 360i Printing Properties window to set up your printing preferences. Use either procedure below to navigate to the Disc Color 360i Printing Properties window.

Accessing Printing Preferences through Windows Start menu

1.From the Windows Start menu:

•In Windows 2000, navigate: Settings > Printers.

•In Windows XP, navigate: Settings > Printers and Faxes.

2.Right-click on the Disc Color 360i and select Printing Preferences from the drop-down menu. The Disc Color 360i Printing Properties window opens.

Accessing Printer Preferences through CD Designer

Note: Properties set in the label file will override the printer driver settings.

1.In CD Designer, open a label file.

2.From the File menu, select Print. The Print window opens.

3.From the Printer Name drop-down list, select Disc Color 360i.

4.Select the Document Properties button. The Disc Color 360i Properties window opens.

110808_C

9

Image 15

Contents Rimage 360i User Guide Page Corporate Headquarters European HeadquartersCD and DVD Recording Software Disclaimer South America RimageNorth America EuropeMaintain the Rimage ContentsContents IntroductionRimage Operating System requirements IntroductionRequirements Software requirementsLabel design requirements Identify the parts of the Rimage Front ViewIdentify the parts of the Rimage Pause button Rimage 360i ButtonsFunctionality Rimage 360i Project Status Indicator PSIImage NameFilter Cover Rear Cover Power Switch Power Cord Port USB Port Rear viewOperate the Rimage Powering on the RimagePausing the Rimage Operate the RimageLoading the discs 1. Open the input door3. Close the input door Navigating to Printing Preferences Accessing Printing Preferences through Windows Start menuAccessing Printer Preferences through CD Designer Select your printing preferencesSetting the print quality Adding, editing, or deleting a watermarkc. Select OK. The Digital Photography Options window closes Adjusting the ink volume used Setting up color options3. Turn Print in Grayscale on or off Standard Area Changing or enabling maskingPrinting on hub with a stacking ring Tip The image below shows a disc with a stacking ringPrinting on hub without a stacking ring Aligning the ink cartridgesTip The image below shows a disc with no stacking ring Checking the ink levels Centering the image on the discMaintain the Rimage General CleaningCleaning the exterior Cleaning the ink cartridge nozzlesReplacing the fan filter Replace Consumablesa. Remove the cartridge and reinsert it Replacing the ink cartridges7. Close the ink cartridge access door c. If the problem persists, replace the cartridgeLearn More Rimage 360i SpecificationsLearn More Technical support and product updatesSafety information Safety precautionsSafety testing Product name RimageModel RAS17 Rimage 360i Limited 1 Year Warranty