Toshiba A09-01P Function Code Access, Display Explanation cont, Quick Reference Guide - Page

Display Explanation (cont.)

	19: TIMER
Display	Description
	Clock: Displays the current time
	(AM or PM).
	Displays days of the week (Sunday
	to Saturday).
	Lights when the NIGHT button is
	pressed and goes out when the
	button is pressed again.
	Lights when night time quiet
	operation is set.
	Indicates scheduled operation 1
	status (including setting time).
	Displays the scheduled operation
	step when the scheduled operation
	STEP1-5 program is set.
	Lights during time setting and
	scheduled operation setting.

	Quick Reference Guide - Page 22
	21: OPERATION
Display	Description
	Lights while internal pump (P1) or
	external pump (P2) is driven.
	Lights during backup operation only by
	the heater.
	Lights when the unit enters the data set
	mode and goes out when the unit exits
	the data set mode.
	Lights when the unit enters the service
	mode and goes out when the unit exits
	the service mode.
	Lights when an error occurs and goes
	out when the error is cleared.
	Lights for two seconds when settings are
	completed.
	Lights for two seconds when settings
	failed.

Function Code Access

Set function codes for various operation modes, input using the remote controller. There are 2 types of settings:-

1)Hydro Unit function code setting.

2)Remote controller function code setting.

Setting procedure for Hydro Unit function code

1. Press the TEST + SET + SELECT buttons

for four seconds or more to enter the hydro unit function code setting mode.

2.Set the function code number with the TEMP. buttons (CODE No.: 01 to 91).

3.Set data (DATA) with the TIME buttons .

4.Press the SET button to confirm the settings.

5.The CL button is enabled only before the SET button is pressed and the function code is changed.

6.Press the TEST button to finish the settings.

Setting procedure for Remote Controller function code

1.Press the TEST + CL + TEMP. ▼ buttons for four seconds or more to enter the remote controller function code setting mode.

2.Set the function code number with the TEMP. buttons (CODE No.: 01 to 13).

3.Set data (DATA) with the TIME buttons .

4.Press the SET button to determine the settings.

5.The CL button is enabled only before the SET button is

pressed and the function code is changed.

6. Press the TEST button to end the settings.