Toshiba A09-01P Hydro Unit Remote Control, Buttons and Functions, Quick Reference Guide - Page

Quick Reference Guide - Page 20

Hydro Unit Remote Control

Buttons and Functions

1. TEMP. button:	Changes the set temperature for	10. NIGHT button:	Controls the night set back
	each operation mode (ZONE1/2 hot
			operation.
	water) by 1°C step.
2. SCHEDULE		11. AUTO TEMP.	Switches setting temperature
button:	Sets the current time and	button:	automatically according to outside
			temperature. (Pressing this button
	scheduled weekly operation.
			long changes the mode to data
			setting mode).
3. TIME button:	Changes time for current time	12. OPERATE
	setting and scheduled weekly	MODE button:	Selects ZONE1/2 operation mode
	operation setting with ▼ and ▲		(heating or cooling).
	buttons.
4. SET button:	Determines the entered current	13. ZONE1, 2
		button:	Turns on/off the zone (floor
	time setting and scheduled weekly
			heating/radiator/FCU) operation.
	operation setting.
5. CL button:		14. ANTI BACTERIA	Regularly increases the hot water
	Clears settings for the current time	button:	temperature in the tank for
			sterilization. (Pressing this button
	and scheduled weekly operation.
			long changes the mode to data
			setting mode).
6. DAY button:	Sets days of the week for current	15. HOT WATER
		BOOST button:	Boosts boiling when high tapping
	time setting and scheduled weekly
			temperature is required temporarily.
	operation setting.
7. STEP button:	Specifies switching STEP number	16. HOT WATER
		button:	Turns on/off hot water operation.
	in a day for weekly schedule.
8. TEST button:		17. SELECT button:	Selects an operation mode when
	Used for test run or service.		changing the set temperature of
			each operation mode.
9. FROST	Controls minimum operation for
PROTECTION
	unused period (going out,
button:
	absence,etc.) for anti freezing.

NOTE

Some functions are not provided depending on the system specification in use.