RF-Link Technology WRT55AG manual Configure the PCs, Wireless Connection to a PC

Page 10

Instant Wireless® Series

Wireless Connection to a PC

If you want to use a wireless connection to access the Router, follow these instructions:

1.Before you begin, make sure that all of your network’s hardware is powered off, including the Router, PCs, and cable or DSL modem.

2.Connect an Ethernet network cable from your cable or DSL modem to the Internet port on the Router’s rear panel, as shown in Figure 3-4. This is the only port that will work for your modem connection.

3. Power on the cable or DSL modem.

Figure 3-4

 

4.Connect the power adapter to the Power port, and then plug the power adapter into a power outlet.

Note: You should always plug the Router’s power adapter into a power strip with surge protection.

•The Power LED on the front panel will light up green as soon as the power adapter is connected properly.

•The Diag LED will light up red for a few seconds and turn off when the self- test is complete. If this LED stays on for one minute or longer, see “Appendix A: Troubleshooting.”

4.Power on one of the PCs on your wireless network(s).

5.For initial access to the Router through a wireless connection, make sure the PC’s wireless adapter has its SSID set to linksys-aor linksys-g(which are the Router’s default SSID settings, depending upon the wireless devices you are using), and its WEP encryption is disabled. After you have accessed the Router, you can change the Router and this PC’s adapter settings to match the your usual network settings.

The Router’s hardware installation is now complete.

Go to “Chapter 4: Configure the PCs.”

Note: You should always change the SSID from its default, linksys, and enable WEP encryption.

Dual-Band Wireless A+G Broadband Router

Chapter 4: Configure the PCs

Overview

The instructions in this chapter will help you configure each of your comput- ers to be able to communicate with the Router.

To do this, you need to configure your PC’s network settings to obtain an IP (or TCP/IP) address automatically, so your PC can function as a DHCP client. Computers use IP addresses to communicate with the Router and each other across a network, such as the Internet.

First, find out which Windows operating system your computer is running. You can find out by clicking the Start button. Read the side panel of the Start menu to find out which operating system your PC is running.

You may need to do this for each computer you are connecting to the Router.

The next few pages tell you, step by step, how to configure your network set- tings based on the type of Windows operating system you are using. Make sure that an Ethernet or wireless adapter (also known as a network adapter) has been successfully installed in each PC you will configure. Once you’ve configured your computers, setup the Router, either by using the Setup Wizard as shown in “Chapter 5: Setting Up the Dual-Band Wireless A+G Broadband Router” or by using the Web-based Utility as shown in “Chapter 6: Configuring the Router’s Basic Settings with the Web-based Utility”.

Important: By default Windows 98, 2000, Me, and XP has TCP/IP installed and set to obtain an IP address automatically.

If your PC does not have TCP/IP installed, click Start and then Help. Search for the keyword TCP/IP. Then follow the instruc- tions to install TCP/IP.

12

 

13

 

 

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Dual-Band Wireless A+G Broadband Router Copyright & Trademarks Table of Contents Dual-Band Wireless A+G Broadband Router IntroductionRouter’s Functions FeaturesIP Addresses Dhcp Dynamic Host Configuration Protocol Servers Router Setup OverviewRouter’s Back Panel Getting to Know the Dual-Band Wireless A+G Broadband RouterRouter’s Front Panel LAN Indicators Internet IndicatorsConnect the Router Wired Connection to a PCOverview Configure the PCs Wireless Connection to a PCConfiguring Windows 98 and Millennium PCs Configuring Windows 2000 PCs Configuring Windows XP PCs Setting Up the Dual-Band Wireless a + G Broadband Router Instant Wireless Series Instant Wireless Series Instant Wireless Series Instant Wireless Series Pptp How to Access the Web-based Utility Router’s Web-based UtilityAutomatic Configuration Dhcp SetupStatic IP Pptp 5GHz, 802.11a 4GHz, 54g/Wireless-G Security System Instant Wireless Series Dhcp Snmp StatusWireless 5GHz, 802.11a HelpAdvanced Wireless Advanced Tabs4GHz, 54g/Wireless-G Internet Filter Port Forwarding Applications External Port TCP Protocol UDP Protocol Routing Click the Delete This Entry buttonDdns Common Problems and Solutions Appendix a TroubleshootingNeed to set a static IP address on a PC For Windows XP Want to test my Internet connectionNeed to set up a server behind my Router TCP UDPCan’t get the Internet game, server, or application to work Firmware upgrade failed, and/or the Diag LED is flashing To start over, I need to set the Router to factory defaultNeed to upgrade the firmware My DSL service’s PPPoE is always disconnectingFrequently Asked Questions Does the Router support ICQ send file? What is DMZ Hosting?How can I block corrupted FTP downloads? What is the Ieee 802.11b standard? What are the advanced features of the Router?What is the Ieee 802.11a standard? What Ieee 802.11a features are supported?What is Spread Spectrum? What is roaming?What is ISM band? What is WEP?How do I resolve issues with signal loss? Appendix B How to Ping Your ISP’s E-mail & Web AddressesHow do I reset the Router? Have excellent signal strength, but I cannot see my networkStep One Pinging an IP Address Step Two Pinging for a Web AddressBackground Appendix C Configuring Wireless SecurityWEP Encryption For Windows 95, 98, and Me Appendix E Glossary Figure D-5Instant Wireless Series 100 101 102 103 104 105 106 107 108 109 110 111 Appendix F Specifications LEDs32ºF to 104ºF 0ºC to 40ºC Appendix G Warranty InformationEnvironmental 4ºF to 158ºF -20ºC to 70ºCAppendix H Contact Information Copyright 2003 Linksys, All Rights Reserved

WRT55AG specifications

The RF-Link Technology WRT55AG is a versatile wireless router designed to cater to the demands of both home and small office environments. As a dual-band device, it operates on both the 2.4 GHz and 5 GHz frequency bands, allowing for enhanced network flexibility and reduced interference. This capability makes it ideal for settings where multiple devices compete for bandwidth, such as homes filled with smart devices and media streaming.

One of the standout features of the WRT55AG is its support for advanced wireless standards, including IEEE 802.11a/b/g/n. This broad compatibility ensures that users can connect various devices, from older laptops and smartphones to the latest smart home gadgets, without issues. The router boasts a maximum theoretical data rate of up to 300 Mbps on the 2.4 GHz band and 450 Mbps on the 5 GHz band, providing ample speed for high-definition video streaming, online gaming, and large file transfers.

Security is a top priority for the WRT55AG, which incorporates WPA2 encryption and can easily configure firewall settings to protect user data from external threats. The router also features a robust Quality of Service (QoS) management tool that enables users to prioritize bandwidth for specific applications or devices. This ensures that crucial tasks, such as video conferencing or online gaming, receive the necessary resources to function optimally.

In terms of connectivity, the WRT55AG is equipped with four Gigabit Ethernet ports, allowing for wired connections to gaming consoles, PCs, and other network devices. This feature is particularly beneficial for users who require stable connections with minimal latency. The router also supports USB connectivity, enabling file sharing and media streaming directly from USB storage devices connected to the router.

The RF-Link Technology WRT55AG also incorporates user-friendly setup options, including an intuitive web interface for quick configuration. With support for both IPv4 and IPv6 protocols, this router is future-proof, ensuring that it remains relevant as Internet standards evolve.

Overall, the RF-Link WRT55AG stands out as a reliable and feature-rich router that meets the needs of modern households and small offices. Its combination of speed, security, and versatility makes it a solid choice for users looking to enhance their wireless networking experience.
Top Page Image Contents