RF-Link Technology WRT55AG manual Pptp

Page 23

Instant Wireless® Series

PPTP

Point to Point Tunneling Protocol (PPTP), selected in the screen shown in Figure 7-7, is a serv- ice that applies to con- nections in Europe only.

Figure 7-7

Specify Internet IP Address This is the Router’s IP address, when seen from the Internet. Your ISP will provide you with the IP Address you need to speci- fy here.

Subnet Mask This is the Router’s Subnet Mask, as seen by external users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask.

Default Gateway Your ISP will provide you with the Default Gateway Address.

User Name and Password Enter the User Name and Password provided by your ISP.

Dual-Band Wireless A+G Broadband Router

Connect on Demand: Max Idle Time You can configure the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inac- tivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. In the Max Idle Time field, enter the number of minutes you want to have elapsed before your Internet connection terminates.

Keep Alive Option: Redial Period If you select this option, the Router will peri- odically check your Internet connection. If you are disconnected, then the Router will automatically re-establish your connection. To use this option, click the radio button next to Keep Alive. To use this option, click the radio button next to Keep Alive. In the Redial Period field, you specify how often you want the Router to check the Internet connection. The default Redial Period is 30 seconds.

To apply any of the settings you change on this page, click the Apply button. To cancel any changes you’ve entered on this page, click the Cancel button. To get more information about the features, click the Help button.

LAN

IP Address and LAN Subnet Mask The values for the Router’s IP Address and Subnet Mask are shown here. The default values are 192.168.1.1 for the LAN IP Address and 255.255.255.0 for the Subnet Mask.

WIRELESS

5GHz, 802.11a Wireless To enable 5GHz, 802.11a wireless networking, make sure the Enable radio button is selected. Click the Change 5GHz Settings but- ton to customize the 802.11a configuration (see Figure 7-8).

2.4GHz Wireless-GTo enable 2.4GHz, Wireless-G wireless networking, make sure the Enable radio button is selected. Click the Change 2.4GHz Settings button to customize the 802.11b configuration (see Figure 7-10).

38

 

39

 

 

 

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Dual-Band Wireless A+G Broadband Router Copyright & Trademarks Table of Contents Introduction Dual-Band Wireless A+G Broadband RouterIP Addresses FeaturesRouter’s Functions Router Setup Overview Dhcp Dynamic Host Configuration Protocol ServersRouter’s Front Panel Getting to Know the Dual-Band Wireless A+G Broadband RouterRouter’s Back Panel Internet Indicators LAN IndicatorsOverview Wired Connection to a PCConnect the Router Wireless Connection to a PC Configure the PCsConfiguring Windows 98 and Millennium PCs Configuring Windows 2000 PCs Configuring Windows XP PCs Setting Up the Dual-Band Wireless a + G Broadband Router Instant Wireless Series Instant Wireless Series Instant Wireless Series Instant Wireless Series Pptp Router’s Web-based Utility How to Access the Web-based UtilitySetup Automatic Configuration DhcpStatic IP Pptp 5GHz, 802.11a 4GHz, 54g/Wireless-G Security System Instant Wireless Series Dhcp Status SnmpHelp Wireless 5GHz, 802.11aAdvanced Tabs Advanced Wireless4GHz, 54g/Wireless-G Internet Filter Port Forwarding Applications External Port TCP Protocol UDP Protocol Click the Delete This Entry button RoutingDdns Need to set a static IP address on a PC Appendix a TroubleshootingCommon Problems and Solutions Want to test my Internet connection For Windows XPTCP UDP Need to set up a server behind my RouterCan’t get the Internet game, server, or application to work My DSL service’s PPPoE is always disconnecting To start over, I need to set the Router to factory defaultNeed to upgrade the firmware Firmware upgrade failed, and/or the Diag LED is flashingFrequently Asked Questions How can I block corrupted FTP downloads? What is DMZ Hosting?Does the Router support ICQ send file? What Ieee 802.11a features are supported? What are the advanced features of the Router?What is the Ieee 802.11a standard? What is the Ieee 802.11b standard?What is WEP? What is roaming?What is ISM band? What is Spread Spectrum?Have excellent signal strength, but I cannot see my network Appendix B How to Ping Your ISP’s E-mail & Web AddressesHow do I reset the Router? How do I resolve issues with signal loss?Step Two Pinging for a Web Address Step One Pinging an IP AddressWEP Encryption Appendix C Configuring Wireless SecurityBackground For Windows 95, 98, and Me Figure D-5 Appendix E GlossaryInstant Wireless Series 100 101 102 103 104 105 106 107 108 109 110 111 LEDs Appendix F Specifications4ºF to 158ºF -20ºC to 70ºC Appendix G Warranty InformationEnvironmental 32ºF to 104ºF 0ºC to 40ºCCopyright 2003 Linksys, All Rights Reserved Appendix H Contact Information

WRT55AG specifications

The RF-Link Technology WRT55AG is a versatile wireless router designed to cater to the demands of both home and small office environments. As a dual-band device, it operates on both the 2.4 GHz and 5 GHz frequency bands, allowing for enhanced network flexibility and reduced interference. This capability makes it ideal for settings where multiple devices compete for bandwidth, such as homes filled with smart devices and media streaming.

One of the standout features of the WRT55AG is its support for advanced wireless standards, including IEEE 802.11a/b/g/n. This broad compatibility ensures that users can connect various devices, from older laptops and smartphones to the latest smart home gadgets, without issues. The router boasts a maximum theoretical data rate of up to 300 Mbps on the 2.4 GHz band and 450 Mbps on the 5 GHz band, providing ample speed for high-definition video streaming, online gaming, and large file transfers.

Security is a top priority for the WRT55AG, which incorporates WPA2 encryption and can easily configure firewall settings to protect user data from external threats. The router also features a robust Quality of Service (QoS) management tool that enables users to prioritize bandwidth for specific applications or devices. This ensures that crucial tasks, such as video conferencing or online gaming, receive the necessary resources to function optimally.

In terms of connectivity, the WRT55AG is equipped with four Gigabit Ethernet ports, allowing for wired connections to gaming consoles, PCs, and other network devices. This feature is particularly beneficial for users who require stable connections with minimal latency. The router also supports USB connectivity, enabling file sharing and media streaming directly from USB storage devices connected to the router.

The RF-Link Technology WRT55AG also incorporates user-friendly setup options, including an intuitive web interface for quick configuration. With support for both IPv4 and IPv6 protocols, this router is future-proof, ensuring that it remains relevant as Internet standards evolve.

Overall, the RF-Link WRT55AG stands out as a reliable and feature-rich router that meets the needs of modern households and small offices. Its combination of speed, security, and versatility makes it a solid choice for users looking to enhance their wireless networking experience.
Top Page Image Contents