RF-Link Technology WRT55AG manual LAN Indicators, Internet Indicators

Page 8

 

Instant Wireless® Series

The 802.11a WLAN Indicators

Act

Green. When the Act LED flickers, the 802.11a wireless net-

 

work is active.

Link

Green. When the Link LED is continuously lit, the 802.11a

 

wireless network is available.

The 802.11b WLAN Indicators

Act

Green. When the Act LED flickers, the 802.11b wireless net-

 

work is active.

Link

Green. When the Link LED is continuously lit, the 802.11b

 

wireless network is available.

The LAN Indicators

Link/Act Green. The Link/Act LED serves two purposes. If the LED is continuously lit, the Router is successfully connected to a device through the corresponding port. If the LED is flicker- ing, the Router is actively sending or receiving data over that port.

Full/Col Green. The Full/Col LED also serves two purposes. If this LED is lit up solidly, the connection made through the corre- sponding port is running in Full Duplex mode. If the LED flickers, the connection is experiencing collisions (when two PCs send data at the same time). Infrequent collisions are normal.

100Orange. The 100 LED lights up when a successful 100Mbps connection is made through the corresponding port.

If this LED does not light up, then your connection speed is 10Mbps.

Dual-Band Wireless A+G Broadband Router

The Internet Indicators

Link/Act

Green. The Link/Act LED lights up when a successful con-

 

nection is made between the Router and your cable or DSL

 

modem (the Internet). The Link/Act LED flickers when the

 

Router is sending or receiving data over the Internet port.

100Orange. The 100 LED lights up when a successful 100Mbps connection is made through the corresponding port.

If this LED does not light up, then your connection speed is 10Mbps.

Proceed to “Chapter 3: Connect the Router.”

8

 

9

 

 

 

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Dual-Band Wireless A+G Broadband Router Copyright & Trademarks Table of Contents Dual-Band Wireless A+G Broadband Router IntroductionIP Addresses FeaturesRouter’s Functions Dhcp Dynamic Host Configuration Protocol Servers Router Setup OverviewRouter’s Front Panel Getting to Know the Dual-Band Wireless A+G Broadband RouterRouter’s Back Panel LAN Indicators Internet IndicatorsOverview Wired Connection to a PCConnect the Router Configure the PCs Wireless Connection to a PCConfiguring Windows 98 and Millennium PCs Configuring Windows 2000 PCs Configuring Windows XP PCs Setting Up the Dual-Band Wireless a + G Broadband Router Instant Wireless Series Instant Wireless Series Instant Wireless Series Instant Wireless Series Pptp How to Access the Web-based Utility Router’s Web-based UtilityAutomatic Configuration Dhcp SetupStatic IP Pptp 5GHz, 802.11a 4GHz, 54g/Wireless-G Security System Instant Wireless Series Dhcp Snmp StatusWireless 5GHz, 802.11a HelpAdvanced Wireless Advanced Tabs4GHz, 54g/Wireless-G Internet Filter Port Forwarding Applications External Port TCP Protocol UDP Protocol Routing Click the Delete This Entry buttonDdns Need to set a static IP address on a PC Appendix a TroubleshootingCommon Problems and Solutions For Windows XP Want to test my Internet connectionNeed to set up a server behind my Router TCP UDPCan’t get the Internet game, server, or application to work To start over, I need to set the Router to factory default Need to upgrade the firmwareFirmware upgrade failed, and/or the Diag LED is flashing My DSL service’s PPPoE is always disconnectingFrequently Asked Questions How can I block corrupted FTP downloads? What is DMZ Hosting?Does the Router support ICQ send file? What are the advanced features of the Router? What is the Ieee 802.11a standard?What is the Ieee 802.11b standard? What Ieee 802.11a features are supported?What is roaming? What is ISM band?What is Spread Spectrum? What is WEP?Appendix B How to Ping Your ISP’s E-mail & Web Addresses How do I reset the Router?How do I resolve issues with signal loss? Have excellent signal strength, but I cannot see my networkStep One Pinging an IP Address Step Two Pinging for a Web AddressWEP Encryption Appendix C Configuring Wireless SecurityBackground For Windows 95, 98, and Me Appendix E Glossary Figure D-5Instant Wireless Series 100 101 102 103 104 105 106 107 108 109 110 111 Appendix F Specifications LEDsAppendix G Warranty Information Environmental32ºF to 104ºF 0ºC to 40ºC 4ºF to 158ºF -20ºC to 70ºCAppendix H Contact Information Copyright 2003 Linksys, All Rights Reserved

WRT55AG specifications

The RF-Link Technology WRT55AG is a versatile wireless router designed to cater to the demands of both home and small office environments. As a dual-band device, it operates on both the 2.4 GHz and 5 GHz frequency bands, allowing for enhanced network flexibility and reduced interference. This capability makes it ideal for settings where multiple devices compete for bandwidth, such as homes filled with smart devices and media streaming.

One of the standout features of the WRT55AG is its support for advanced wireless standards, including IEEE 802.11a/b/g/n. This broad compatibility ensures that users can connect various devices, from older laptops and smartphones to the latest smart home gadgets, without issues. The router boasts a maximum theoretical data rate of up to 300 Mbps on the 2.4 GHz band and 450 Mbps on the 5 GHz band, providing ample speed for high-definition video streaming, online gaming, and large file transfers.

Security is a top priority for the WRT55AG, which incorporates WPA2 encryption and can easily configure firewall settings to protect user data from external threats. The router also features a robust Quality of Service (QoS) management tool that enables users to prioritize bandwidth for specific applications or devices. This ensures that crucial tasks, such as video conferencing or online gaming, receive the necessary resources to function optimally.

In terms of connectivity, the WRT55AG is equipped with four Gigabit Ethernet ports, allowing for wired connections to gaming consoles, PCs, and other network devices. This feature is particularly beneficial for users who require stable connections with minimal latency. The router also supports USB connectivity, enabling file sharing and media streaming directly from USB storage devices connected to the router.

The RF-Link Technology WRT55AG also incorporates user-friendly setup options, including an intuitive web interface for quick configuration. With support for both IPv4 and IPv6 protocols, this router is future-proof, ensuring that it remains relevant as Internet standards evolve.

Overall, the RF-Link WRT55AG stands out as a reliable and feature-rich router that meets the needs of modern households and small offices. Its combination of speed, security, and versatility makes it a solid choice for users looking to enhance their wireless networking experience.
Top Page Image Contents