RF-Link Technology WRT55AG manual Automatic Configuration Dhcp, Setup

Page 21

Instant Wireless® Series

Note: For added security, you should always change the password through the Password screen of the web-based utility.

To apply any of the settings you change on a page, click the Apply button. To cancel any changes you’ve entered on any page, click the Cancel button. To get additional information about any screen’s features, click the Help button.

Setup

The Setup screen is the first screen you see when you access the web-based utility. If you have already installed and set up the Router, you have already seen this screen and properly configured all of the screen’s values.

Firmware Version This shows the version and date of the firmware you are using. Future versions of the Router’s firmware will be posted and available for download on the Linksys website at www.linksys.com.

Time Zone Select your local time zone from this pull-down menu. The Router will show the correct time for your area.

Host Name and Domain Name These fields allow you to supply a host and domain name for the Router. Some ISPs, usually cable ISPs, require these names as identification. You may have to check with your ISP to see if your broadband Internet service has been configured with a host and domain name. In most cases, leaving these fields blank will work.

Configuration Type The Router supports four connection types: Automatic Configuration - DHCP, Static IP, PPPoE, and PPTP. Each Setup screen and available features will differ depending on what kind of connection type you select.

Note: You can verify that the Internet configuration settings are cor- rect by successfully connecting to the Internet.

Dual-Band Wireless A+G Broadband Router

Automatic Configuration - DHCP

By default, the Router’s Configuration Type is set to Automatic Configuration

-DHCP, as shown in Figure 7-4, and it should be kept only if your ISP supports DHCP or you are connecting through a dynamic IP address.

To apply any of the settings you change on this page, click the Apply button. To cancel any changes you’ve entered on this page, click the Cancel button. To get more information about the features, click the Help button.

Figure 7-4

34

 

35

 

 

 

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Dual-Band Wireless A+G Broadband Router Copyright & Trademarks Table of Contents Introduction Dual-Band Wireless A+G Broadband RouterFeatures Router’s FunctionsIP Addresses Router Setup Overview Dhcp Dynamic Host Configuration Protocol ServersGetting to Know the Dual-Band Wireless A+G Broadband Router Router’s Back PanelRouter’s Front Panel Internet Indicators LAN IndicatorsWired Connection to a PC Connect the RouterOverview Wireless Connection to a PC Configure the PCsConfiguring Windows 98 and Millennium PCs Configuring Windows 2000 PCs Configuring Windows XP PCs Setting Up the Dual-Band Wireless a + G Broadband Router Instant Wireless Series Instant Wireless Series Instant Wireless Series Instant Wireless Series Pptp Router’s Web-based Utility How to Access the Web-based UtilitySetup Automatic Configuration DhcpStatic IP Pptp 5GHz, 802.11a 4GHz, 54g/Wireless-G Security System Instant Wireless Series Dhcp Status SnmpHelp Wireless 5GHz, 802.11aAdvanced Tabs Advanced Wireless4GHz, 54g/Wireless-G Internet Filter Port Forwarding Applications External Port TCP Protocol UDP Protocol Click the Delete This Entry button RoutingDdns Appendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a PC Want to test my Internet connection For Windows XPTCP UDP Need to set up a server behind my RouterCan’t get the Internet game, server, or application to work Need to upgrade the firmware To start over, I need to set the Router to factory defaultFirmware upgrade failed, and/or the Diag LED is flashing My DSL service’s PPPoE is always disconnectingFrequently Asked Questions What is DMZ Hosting? Does the Router support ICQ send file?How can I block corrupted FTP downloads? What is the Ieee 802.11a standard? What are the advanced features of the Router?What is the Ieee 802.11b standard? What Ieee 802.11a features are supported?What is ISM band? What is roaming?What is Spread Spectrum? What is WEP?How do I reset the Router? Appendix B How to Ping Your ISP’s E-mail & Web AddressesHow do I resolve issues with signal loss? Have excellent signal strength, but I cannot see my networkStep Two Pinging for a Web Address Step One Pinging an IP AddressAppendix C Configuring Wireless Security BackgroundWEP Encryption For Windows 95, 98, and Me Figure D-5 Appendix E GlossaryInstant Wireless Series 100 101 102 103 104 105 106 107 108 109 110 111 LEDs Appendix F SpecificationsEnvironmental Appendix G Warranty Information32ºF to 104ºF 0ºC to 40ºC 4ºF to 158ºF -20ºC to 70ºCCopyright 2003 Linksys, All Rights Reserved Appendix H Contact Information

WRT55AG specifications

The RF-Link Technology WRT55AG is a versatile wireless router designed to cater to the demands of both home and small office environments. As a dual-band device, it operates on both the 2.4 GHz and 5 GHz frequency bands, allowing for enhanced network flexibility and reduced interference. This capability makes it ideal for settings where multiple devices compete for bandwidth, such as homes filled with smart devices and media streaming.

One of the standout features of the WRT55AG is its support for advanced wireless standards, including IEEE 802.11a/b/g/n. This broad compatibility ensures that users can connect various devices, from older laptops and smartphones to the latest smart home gadgets, without issues. The router boasts a maximum theoretical data rate of up to 300 Mbps on the 2.4 GHz band and 450 Mbps on the 5 GHz band, providing ample speed for high-definition video streaming, online gaming, and large file transfers.

Security is a top priority for the WRT55AG, which incorporates WPA2 encryption and can easily configure firewall settings to protect user data from external threats. The router also features a robust Quality of Service (QoS) management tool that enables users to prioritize bandwidth for specific applications or devices. This ensures that crucial tasks, such as video conferencing or online gaming, receive the necessary resources to function optimally.

In terms of connectivity, the WRT55AG is equipped with four Gigabit Ethernet ports, allowing for wired connections to gaming consoles, PCs, and other network devices. This feature is particularly beneficial for users who require stable connections with minimal latency. The router also supports USB connectivity, enabling file sharing and media streaming directly from USB storage devices connected to the router.

The RF-Link Technology WRT55AG also incorporates user-friendly setup options, including an intuitive web interface for quick configuration. With support for both IPv4 and IPv6 protocols, this router is future-proof, ensuring that it remains relevant as Internet standards evolve.

Overall, the RF-Link WRT55AG stands out as a reliable and feature-rich router that meets the needs of modern households and small offices. Its combination of speed, security, and versatility makes it a solid choice for users looking to enhance their wireless networking experience.
Top Page Image Contents