RF-Link Technology WRT55AG manual Router’s Web-based Utility, How to Access the Web-based Utility

Page 20
Figure 7-1

Instant Wireless® Series

5. To configure the Router for your wireless network(s), perform these steps:

A. To enable 5GHz, 802.11a wireless networking, make sure the 5GHz, 802.11a Enable radio button is selected. Then click the Change 5GHz Settings button, and customize the SSID, Channel, and WEP encryption settings as needed. Then click the Apply button to save your changes. For more information, refer to “Chapter 7: The Router’s Web-based Utility.”

Important: Operation within the 5150 to 5250GHz band is restricted to indoor use only.

B.To enable 2.4GHz, Wireless-G wireless networking, make sure the 2.4GHz, 802.11g Enable radio button is selected. Then click the Change 2.4GHz Settings button, and customize the SSID, Channel, and WEP encryption settings as needed. Then click the Apply button to save your changes. For more information, refer to “Chapter 7: The Router’s Web-based Utility.”

6.If you haven’t already done so, click the Apply button to save your Setup settings. Close the web browser.

7.Restart your computers so that they can obtain the Router’s new settings.

If you need more details or advanced setting information, please refer to “Chapter 7: The Router’s Web-based Utility” or the Linksys support web- site at support.linksys.com.

Figure 6-8

Test the setup by opening your web browser from any computer and enter- ing http://www.linksys.com/registration, as shown in Figure 6-8.

Congratulations! You’ve successfully configured the Router.

If you are unable to reach our website, you may want to review what you did in this section or refer to “Appendix A: Troubleshooting.”

Proceed to “Chapter 7: The Router’s Web-based Utility” for more details

and advanced settings information.

Dual-Band Wireless A+G Broadband Router

Chapter 7: The Router’s

Web-based Utility

Overview

Use the Router’s web-based utility to administer it. This chapter will describe each web page in the Utility and each page’s key functions. The utility can be accessed via your web browser through use of a computer connected to the Router.

The Setup, Security, System, DHCP, SNMP, Status, and Help screens are avail- able for basic setup. For advanced setup, click the Advanced tab to access these screens: Advanced Wireless, Internet Filter, Port Forwarding, Routing, and DDNS.

How to Access the Web-based Utility

To access the web-based utility, launch Internet Explorer or Netscape Navigator, and enter the

Router’s default IP address, 192.168.1.1, in the Address field, as shown in Figure 7-1. Then press Enter.

A password request page, shown in Figure 7-2 will pop up. (Windows XP users will see a Connect to 192.168.1.1 window, shown in Figure 7-3). Leave the User Name field blank, and enter admin (the default password) in the Password field. Then click the OK

button.

Figure 7-2

 

Figure 7-3

32

 

33

 

 

 

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Dual-Band Wireless A+G Broadband Router Copyright & Trademarks Table of Contents Dual-Band Wireless A+G Broadband Router IntroductionIP Addresses FeaturesRouter’s Functions Dhcp Dynamic Host Configuration Protocol Servers Router Setup OverviewRouter’s Front Panel Getting to Know the Dual-Band Wireless A+G Broadband RouterRouter’s Back Panel LAN Indicators Internet IndicatorsOverview Wired Connection to a PCConnect the Router Configure the PCs Wireless Connection to a PCConfiguring Windows 98 and Millennium PCs Configuring Windows 2000 PCs Configuring Windows XP PCs Setting Up the Dual-Band Wireless a + G Broadband Router Instant Wireless Series Instant Wireless Series Instant Wireless Series Instant Wireless Series Pptp How to Access the Web-based Utility Router’s Web-based UtilityAutomatic Configuration Dhcp SetupStatic IP Pptp 5GHz, 802.11a 4GHz, 54g/Wireless-G Security System Instant Wireless Series Dhcp Snmp StatusWireless 5GHz, 802.11a HelpAdvanced Wireless Advanced Tabs4GHz, 54g/Wireless-G Internet Filter Port Forwarding Applications External Port TCP Protocol UDP Protocol Routing Click the Delete This Entry buttonDdns Need to set a static IP address on a PC Appendix a TroubleshootingCommon Problems and Solutions For Windows XP Want to test my Internet connectionNeed to set up a server behind my Router TCP UDPCan’t get the Internet game, server, or application to work To start over, I need to set the Router to factory default Need to upgrade the firmwareFirmware upgrade failed, and/or the Diag LED is flashing My DSL service’s PPPoE is always disconnectingFrequently Asked Questions How can I block corrupted FTP downloads? What is DMZ Hosting?Does the Router support ICQ send file? What are the advanced features of the Router? What is the Ieee 802.11a standard?What is the Ieee 802.11b standard? What Ieee 802.11a features are supported?What is roaming? What is ISM band?What is Spread Spectrum? What is WEP?Appendix B How to Ping Your ISP’s E-mail & Web Addresses How do I reset the Router?How do I resolve issues with signal loss? Have excellent signal strength, but I cannot see my networkStep One Pinging an IP Address Step Two Pinging for a Web AddressWEP Encryption Appendix C Configuring Wireless SecurityBackground For Windows 95, 98, and Me Appendix E Glossary Figure D-5Instant Wireless Series 100 101 102 103 104 105 106 107 108 109 110 111 Appendix F Specifications LEDsAppendix G Warranty Information Environmental32ºF to 104ºF 0ºC to 40ºC 4ºF to 158ºF -20ºC to 70ºCAppendix H Contact Information Copyright 2003 Linksys, All Rights Reserved

WRT55AG specifications

The RF-Link Technology WRT55AG is a versatile wireless router designed to cater to the demands of both home and small office environments. As a dual-band device, it operates on both the 2.4 GHz and 5 GHz frequency bands, allowing for enhanced network flexibility and reduced interference. This capability makes it ideal for settings where multiple devices compete for bandwidth, such as homes filled with smart devices and media streaming.

One of the standout features of the WRT55AG is its support for advanced wireless standards, including IEEE 802.11a/b/g/n. This broad compatibility ensures that users can connect various devices, from older laptops and smartphones to the latest smart home gadgets, without issues. The router boasts a maximum theoretical data rate of up to 300 Mbps on the 2.4 GHz band and 450 Mbps on the 5 GHz band, providing ample speed for high-definition video streaming, online gaming, and large file transfers.

Security is a top priority for the WRT55AG, which incorporates WPA2 encryption and can easily configure firewall settings to protect user data from external threats. The router also features a robust Quality of Service (QoS) management tool that enables users to prioritize bandwidth for specific applications or devices. This ensures that crucial tasks, such as video conferencing or online gaming, receive the necessary resources to function optimally.

In terms of connectivity, the WRT55AG is equipped with four Gigabit Ethernet ports, allowing for wired connections to gaming consoles, PCs, and other network devices. This feature is particularly beneficial for users who require stable connections with minimal latency. The router also supports USB connectivity, enabling file sharing and media streaming directly from USB storage devices connected to the router.

The RF-Link Technology WRT55AG also incorporates user-friendly setup options, including an intuitive web interface for quick configuration. With support for both IPv4 and IPv6 protocols, this router is future-proof, ensuring that it remains relevant as Internet standards evolve.

Overall, the RF-Link WRT55AG stands out as a reliable and feature-rich router that meets the needs of modern households and small offices. Its combination of speed, security, and versatility makes it a solid choice for users looking to enhance their wireless networking experience.
Top Page Image Contents