RF-Link Technology WRT55AG manual For Windows 95, 98, and Me

Page 51

Instant Wireless® Series

Appendix D: Finding the MAC Address and IP Address for Your Ethernet Adapter

This section describes how to find the MAC address for your Ethernet adapter to do either MAC address filtering or MAC address cloning for the Router and ISP. You can also find the IP address of your computer’s Ethernet adapter. The IP address is used for filtering, forwarding, and DMZ. Follow the steps in this appendix to find the MAC address or IP address for your adapter in Windows 95, 98, Me, NT, 2000, and XP.

For Windows 95, 98, and Me:

1.Click on Start and Run. In the Open field, enter winipcfg. Then press the Enter key or the OK button.

Figure D-1

2.When the IP Configuration window appears, select the Ethernet adapter you are using to connect to the Router via a Category 5 Ethernet network cable.

Figure D-2

Dual-Band Wireless A+G Broadband Router

3.Write down the Adapter Address as shown on your computer screen (see Figure E-3). This is the MAC address for your Ethernet adapter and will be shown as a series of numbers and letters.

The MAC address/Adapter Address is what you will use for MAC address cloning or MAC filtering.

Figure D-3

Write down the IP Address as shown on your computer screen. The exam- ple in Figure E-3 shows the IP address of your Ethernet adapter as 192.168.1.100. Your computer may show something different.

Note: The MAC address is also called the Adapter

Address.

For Windows NT, 2000, and XP:

1.Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button.

Figure D-4

94

95

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Dual-Band Wireless A+G Broadband Router Copyright & Trademarks Table of Contents Introduction Dual-Band Wireless A+G Broadband RouterFeatures Router’s FunctionsIP Addresses Router Setup Overview Dhcp Dynamic Host Configuration Protocol ServersGetting to Know the Dual-Band Wireless A+G Broadband Router Router’s Back PanelRouter’s Front Panel Internet Indicators LAN IndicatorsWired Connection to a PC Connect the RouterOverview Wireless Connection to a PC Configure the PCsConfiguring Windows 98 and Millennium PCs Configuring Windows 2000 PCs Configuring Windows XP PCs Setting Up the Dual-Band Wireless a + G Broadband Router Instant Wireless Series Instant Wireless Series Instant Wireless Series Instant Wireless Series Pptp Router’s Web-based Utility How to Access the Web-based UtilitySetup Automatic Configuration DhcpStatic IP Pptp 5GHz, 802.11a 4GHz, 54g/Wireless-G Security System Instant Wireless Series Dhcp Status SnmpHelp Wireless 5GHz, 802.11aAdvanced Tabs Advanced Wireless4GHz, 54g/Wireless-G Internet Filter Port Forwarding Applications External Port TCP Protocol UDP Protocol Click the Delete This Entry button RoutingDdns Appendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a PC Want to test my Internet connection For Windows XPTCP UDP Need to set up a server behind my RouterCan’t get the Internet game, server, or application to work My DSL service’s PPPoE is always disconnecting To start over, I need to set the Router to factory defaultNeed to upgrade the firmware Firmware upgrade failed, and/or the Diag LED is flashingFrequently Asked Questions What is DMZ Hosting? Does the Router support ICQ send file?How can I block corrupted FTP downloads? What Ieee 802.11a features are supported? What are the advanced features of the Router?What is the Ieee 802.11a standard? What is the Ieee 802.11b standard?What is WEP? What is roaming?What is ISM band? What is Spread Spectrum?Have excellent signal strength, but I cannot see my network Appendix B How to Ping Your ISP’s E-mail & Web AddressesHow do I reset the Router? How do I resolve issues with signal loss?Step Two Pinging for a Web Address Step One Pinging an IP AddressAppendix C Configuring Wireless Security BackgroundWEP Encryption For Windows 95, 98, and Me Figure D-5 Appendix E GlossaryInstant Wireless Series 100 101 102 103 104 105 106 107 108 109 110 111 LEDs Appendix F Specifications4ºF to 158ºF -20ºC to 70ºC Appendix G Warranty InformationEnvironmental 32ºF to 104ºF 0ºC to 40ºCCopyright 2003 Linksys, All Rights Reserved Appendix H Contact Information

WRT55AG specifications

The RF-Link Technology WRT55AG is a versatile wireless router designed to cater to the demands of both home and small office environments. As a dual-band device, it operates on both the 2.4 GHz and 5 GHz frequency bands, allowing for enhanced network flexibility and reduced interference. This capability makes it ideal for settings where multiple devices compete for bandwidth, such as homes filled with smart devices and media streaming.

One of the standout features of the WRT55AG is its support for advanced wireless standards, including IEEE 802.11a/b/g/n. This broad compatibility ensures that users can connect various devices, from older laptops and smartphones to the latest smart home gadgets, without issues. The router boasts a maximum theoretical data rate of up to 300 Mbps on the 2.4 GHz band and 450 Mbps on the 5 GHz band, providing ample speed for high-definition video streaming, online gaming, and large file transfers.

Security is a top priority for the WRT55AG, which incorporates WPA2 encryption and can easily configure firewall settings to protect user data from external threats. The router also features a robust Quality of Service (QoS) management tool that enables users to prioritize bandwidth for specific applications or devices. This ensures that crucial tasks, such as video conferencing or online gaming, receive the necessary resources to function optimally.

In terms of connectivity, the WRT55AG is equipped with four Gigabit Ethernet ports, allowing for wired connections to gaming consoles, PCs, and other network devices. This feature is particularly beneficial for users who require stable connections with minimal latency. The router also supports USB connectivity, enabling file sharing and media streaming directly from USB storage devices connected to the router.

The RF-Link Technology WRT55AG also incorporates user-friendly setup options, including an intuitive web interface for quick configuration. With support for both IPv4 and IPv6 protocols, this router is future-proof, ensuring that it remains relevant as Internet standards evolve.

Overall, the RF-Link WRT55AG stands out as a reliable and feature-rich router that meets the needs of modern households and small offices. Its combination of speed, security, and versatility makes it a solid choice for users looking to enhance their wireless networking experience.
Top Page Image Contents