RF-Link Technology WRT55AG manual For Windows XP, Want to test my Internet connection

Page 40

Instant Wireless® Series

For Windows XP:

The following instructions assume you are running Windows XP with the default interface. If you are using the Classic interface (where the icons and menus look like previous Windows versions), please follow the instructions for Windows 2000.

A.Click Start and Control Panel.

B.Click the Network and Internet Connections icon and then the Network Connections icon.

C.Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option.

D.In the This connection uses the following items box, highlight Internet Protocol (TCP/IP). Click the Properties button.

E.Enter a unique IP address that is not used by any other computer on the net- work connected to the Router. You can only use an IP address in the ranges 192.168.1.2 to 192.168.1.99 and 192.168.1.151 to 192.168.1.254.

F.Enter the Subnet Mask, 255.255.255.0.

G.Enter the Default Gateway, 192.168.1.1 (Router’s default IP address).

H.Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information.

I.Click the OK button in the Internet Protocol (TCP/IP) Properties window. Click the OK button in the Local Area Connection Properties window.

2.I want to test my Internet connection.

A. Check your TCP/IP settings.

For Windows 98, Me, 2000, and XP:

Refer to “Chapter 4: Configure the PCs” for details. Make sure Obtain IP address automatically is selected in the settings.

For Windows NT 4.0:

•Click Start, Settings, and Control Panel. Double-click the Network icon.

•Click the Protocol tab, and double-click on TCP/IP Protocol.

•When the window appears, make sure you have selected the correct Adapter for your Ethernet adapter and set it for Obtain an IP address from a DHCP server.

•Click the OK button in the TCP/IP Protocol Properties window, and click the Close button in the Network window.

•Restart the computer if asked.

Dual-Band Wireless A+G Broadband Router

B.Open a command prompt.

•For Windows 98 and Me, please click Start and Run. In the Open field, type in command. Press the Enter key or click the OK button.

•For Windows NT, 2000, and XP, please click Start and Run. In the Open field, type cmd. Press the Enter key or click the OK button.

C.In the command prompt, type ping 192.168.1.1 and press the Enter key.

•If you get a reply, the computer is communicating with the Router.

•If you do NOT get a reply, please check the cable, and make sure Obtain an IP address automatically is selected in the TCP/IP settings for your Ethernet adapter.

D.In the command prompt, type ping followed by your Internet or WAN IP address and press the Enter key. The Internet or WAN IP Address can be found on the Status screen of the Router’s web-based utility. For example, if your Internet or WAN IP address is 1.2.3.4, you would enter ping 1.2.3.4 and press the Enter key.

•If you get a reply, the computer is connected to the Router.

•If you do NOT get a reply, try the ping command from a different com- puter to verify that your original computer is not the cause of the problem.

E.In the command prompt, type ping www.yahoo.com and press the Enter key.

•If you get a reply, the computer is connected to the Internet. If you can- not open a webpage, try the ping command from a different computer to verify that your original computer is not the cause of the problem.

•If you do NOT get a reply, there may be a problem with the connection. Try the ping command from a different computer to verify that your orig- inal computer is not the cause of the problem.

3. I am not getting an IP address on the Internet with my Internet connection.

A.Refer to “Problem #2, I want to test my Internet connection” to verify that you have connectivity.

B.If you need to register the MAC address of your Ethernet adapter with your ISP, please see “Appendix D: Finding the MAC address and IP Address for Your Ethernet Adapter.” If you need to clone the MAC address of your Ethernet adapter onto the Router, see the MAC Address Clone section of “Chapter 7: The Router’s Web-based Utility” for details.

C.Make sure you are using the right Internet connection settings. Contact your ISP to see if your Internet connection type is DHCP, Static IP Address, or PPPoE (commonly used by DSL consumers). Please refer to the Setup sec- tion of “Chapter 7: The Router’s Web-based Utility” for details on Internet connection settings.

72

73

Page 39 Page 41
Image 40
Page 39 Page 41
Contents Dual-Band Wireless A+G Broadband Router Copyright & Trademarks Table of Contents Dual-Band Wireless A+G Broadband Router IntroductionRouter’s Functions FeaturesIP Addresses Dhcp Dynamic Host Configuration Protocol Servers Router Setup OverviewRouter’s Back Panel Getting to Know the Dual-Band Wireless A+G Broadband RouterRouter’s Front Panel LAN Indicators Internet IndicatorsConnect the Router Wired Connection to a PCOverview Configure the PCs Wireless Connection to a PCConfiguring Windows 98 and Millennium PCs Configuring Windows 2000 PCs Configuring Windows XP PCs Setting Up the Dual-Band Wireless a + G Broadband Router Instant Wireless Series Instant Wireless Series Instant Wireless Series Instant Wireless Series Pptp How to Access the Web-based Utility Router’s Web-based UtilityAutomatic Configuration Dhcp SetupStatic IP Pptp 5GHz, 802.11a 4GHz, 54g/Wireless-G Security System Instant Wireless Series Dhcp Snmp StatusWireless 5GHz, 802.11a HelpAdvanced Wireless Advanced Tabs4GHz, 54g/Wireless-G Internet Filter Port Forwarding Applications External Port TCP Protocol UDP Protocol Routing Click the Delete This Entry buttonDdns Common Problems and Solutions Appendix a TroubleshootingNeed to set a static IP address on a PC For Windows XP Want to test my Internet connectionNeed to set up a server behind my Router TCP UDPCan’t get the Internet game, server, or application to work To start over, I need to set the Router to factory default Need to upgrade the firmwareFirmware upgrade failed, and/or the Diag LED is flashing My DSL service’s PPPoE is always disconnectingFrequently Asked Questions Does the Router support ICQ send file? What is DMZ Hosting?How can I block corrupted FTP downloads? What are the advanced features of the Router? What is the Ieee 802.11a standard?What is the Ieee 802.11b standard? What Ieee 802.11a features are supported?What is roaming? What is ISM band?What is Spread Spectrum? What is WEP?Appendix B How to Ping Your ISP’s E-mail & Web Addresses How do I reset the Router?How do I resolve issues with signal loss? Have excellent signal strength, but I cannot see my networkStep One Pinging an IP Address Step Two Pinging for a Web AddressBackground Appendix C Configuring Wireless SecurityWEP Encryption For Windows 95, 98, and Me Appendix E Glossary Figure D-5Instant Wireless Series 100 101 102 103 104 105 106 107 108 109 110 111 Appendix F Specifications LEDsAppendix G Warranty Information Environmental32ºF to 104ºF 0ºC to 40ºC 4ºF to 158ºF -20ºC to 70ºCAppendix H Contact Information Copyright 2003 Linksys, All Rights Reserved

WRT55AG specifications

The RF-Link Technology WRT55AG is a versatile wireless router designed to cater to the demands of both home and small office environments. As a dual-band device, it operates on both the 2.4 GHz and 5 GHz frequency bands, allowing for enhanced network flexibility and reduced interference. This capability makes it ideal for settings where multiple devices compete for bandwidth, such as homes filled with smart devices and media streaming.

One of the standout features of the WRT55AG is its support for advanced wireless standards, including IEEE 802.11a/b/g/n. This broad compatibility ensures that users can connect various devices, from older laptops and smartphones to the latest smart home gadgets, without issues. The router boasts a maximum theoretical data rate of up to 300 Mbps on the 2.4 GHz band and 450 Mbps on the 5 GHz band, providing ample speed for high-definition video streaming, online gaming, and large file transfers.

Security is a top priority for the WRT55AG, which incorporates WPA2 encryption and can easily configure firewall settings to protect user data from external threats. The router also features a robust Quality of Service (QoS) management tool that enables users to prioritize bandwidth for specific applications or devices. This ensures that crucial tasks, such as video conferencing or online gaming, receive the necessary resources to function optimally.

In terms of connectivity, the WRT55AG is equipped with four Gigabit Ethernet ports, allowing for wired connections to gaming consoles, PCs, and other network devices. This feature is particularly beneficial for users who require stable connections with minimal latency. The router also supports USB connectivity, enabling file sharing and media streaming directly from USB storage devices connected to the router.

The RF-Link Technology WRT55AG also incorporates user-friendly setup options, including an intuitive web interface for quick configuration. With support for both IPv4 and IPv6 protocols, this router is future-proof, ensuring that it remains relevant as Internet standards evolve.

Overall, the RF-Link WRT55AG stands out as a reliable and feature-rich router that meets the needs of modern households and small offices. Its combination of speed, security, and versatility makes it a solid choice for users looking to enhance their wireless networking experience.
Top Page Image Contents