Getting Started | Configuration Tools |
Configuration Tools
P5055M radios can be configured using either the Command Line Interface (CLI), or the Web Browser (HTTP) interface. The CLI method provides slightly more functionality.
This text covers configuration through the CLI. For HTTP configuration please see Appendix A.
Telnet
Open a command prompt (DOS) session on your PC. Open a Telnet session by typing:
telnet <ip address of radio>
Example:
C:>telnet 192.168.100.100
Note: All Trango radios are
You will be greeted with current hardware and firmware information and prompted for a password. Type in the password and press enter. The factory default read/write password is trango.
Welcome to Trango Broadband Wireless,
Password:
Login as read/write. #>
Note: Type help for a listing of all CLI commands. Type help [<command>], for the syntax of a particular command.
Note: If you cannot access the radio management functions via the Ethernet port, check all cable connections and ensure that your PC is set up with a properly routable subnet.
Changing Password
Three types of passwords are used in the
rw | read write password. User can view and update all system parameters |
ro | read only password. User can view system information only |
Upgrade | Firmware upgrade password. This password must be included in the file name of the main |
| image and web browser firmware files during the TFTP upload process. |
Use the password <rorwupgrade>command to change the various passwords.
Examples:
#> password rw
New Password (4 to 16 characters): *******
Confirm Password: *******
Success.
#> password ro
New Password (4 to 16 characters): ******
Confirm Password: ******
Success.
Trango Broadband Wireless — | page 14 |