Trango Broadband TrangoLINK-45TM Encryption Feature Description, MIR Feature Description

Page 28

Configuration

Encryption Feature Description

Encryption Feature Description

The TrangoLINK-45 system offers 128 bit proprietary encryption which may be turned on or off by the user. The HEX encryption key must be set in both the MU and RU. Users can expect faster payload speeds with encryption turned off as compared to with encryption turned on.

Example:

#> encrypt on Success.

#> encrypt key 1111 2222 3333 4444 5555 6666 7777 8888 argc = 10

Success.

#>

MIR Feature Description

Maximum Information rate is configurable on both the MU and RU. The MIR function is performed on the transmit side only and is based on a one second timing interval. During each one second timing interval, the total bits transferred is compared to the MIR limit configured by the user. When the limit is exceeded, no more data is sent and the packets in the queue will be dropped. This function is useful for reserving more bandwidth in one direction than the other. If left wide open, the system will respond to bandwidth demand as needed, allowing the full bandwidth of the channel to be used by either direction.

Example:

#> mir 10000 Success.

#>

Trango Broadband Wireless — TrangoLINK-45

page 28

Image 28
Contents Ffirm TrangoLINK-45 Point-to-Point Wireless Ethernet Bridge DFS Ofdm Firmware Upgrade Procedure Preface FCC InformationWarranty Information Industry Canada InformationEurope Information Email sales@trangobroadband.com Overview Adaptive ModulationARQ Dual Polarity AntennaRange vs. Throughput ISM 5725 MHz to 5875 MHz Line-of-Sight Range & ThroughputSystem Contents Location of RJ-45/LED Port & IP Reset Button Location of Serial Number & MAC AddressConnections and Power Getting StartedConfiguration Tools Changing PasswordTroubleshooting Ethernet Connections System Information sysinfoSysinfo Example MAC ARQ RssiRssi LED Getting Started System Information sysinfo Configuration Essentials to Establish a Wireless LinkMaster Unit Configuration Key ConceptsRemote Unit Configuration Changing IP Address Establishing a Wireless LinkLEDs RF Link Loopback Test linktest command Command format linktest loc speed peer speedSuccess Link Speed & Power Settings BpskQpsk 16QAMMU Autoscan Feature Description Important Note for -EU ModelsAutomatic Rate Shifting Feature Description Encryption Feature Description MIR Feature DescriptionCommand Reference Listing Configuration Command Reference Listing Configuration Command Reference Listing Site Selection Deployment & InstallationSite survey Channel Planning Rssi Command and Antenna Alignment Port Plug and Port Plate Hardware Mounting HardwareConnecting External Antenna on EXT Model WeatherizingGrounding Cat-5 Cabling ConsiderationsSnmp SnmpFirmware Upgrade Procedure Firmware Upgrade PasswordUpgrade Procedure Example 1 Upgrade main image firmware to 1.0a6From Computer Command Prompt Session Appendix a Using the Http Interface Appendix a MAC Configuration Appendix a Connection Status Site Survey Link Control Appendix B Specifications RF ParametersChannels of Operation FEC & ARQAppendix B Specifications Regulatory Compliance Data ParametersEtsi Power Parameters Power SupplyMechanical EnvironmentalAntennas Vswr