Trango Broadband TrangoLINK-45TM user manual Snmp

SNMP SNMP

Chapter 5 SNMP

SNMP

The TrangoLINK-45 supports SNMP (Simple Network Management Protocol). Network management consists of the following 3 categories: configuration, Link and Association monitoring and Alarms. Besides this proprietary Management Information Base (MIB) the TrangoLINK-45 also supports a large part of the MIB-II OIDs.

Review the Trango MIB (TRANGO-P5M-MIB.mib) available on our website for the complete listing of all MIB objects available.

These capabilities allow the system administrator to provide superior service through higher network accessibility and integrated performance monitoring.

Depending on your Network Node Manager (NNM) it may be necessary to append a “.0” onto the end of each of the OIDs listed below for proper operation.

	Objects for Configuration	Name	Description
	1.3.6.1.4.1.5454.1.40.1.1.1	verUnitType	Returns radios unit	type
			(0 = RU, 1= MU)
1.3.6.1.4.1.5454.1.40.1.8.3		sysswAutoScanMUSignal	Returns value of Auto Scan switch
			(0 = off,1 = on)
1.3.6.1.4.1.5454.1.40.1.3		sysDefaultOpmode	Returns defaultOpmode setting
			(0 = off,1 = on)
1.3.6.1.4.1.5454.1.40.1.4		sysCurrentOpmode	Returns current opmode setting
			(0 = off,1 = on)
1.3.6.1.4.1.5454.1.40.1.5		sysActivateOpmode	Turns opmode on
1.3.6.1.4.1.5454.1.40.1.13.1		sysipconfigIpAddress	Sets IP address
1.3.6.1.4.1.5454.1.40.1.13.2		sysipconfigSubnet	Sets subnet
1.3.6.1.4.1.5454.1.40.1.13.3		sysipconfigDefaultGateway	Set default gateway
1.3.6.1.4.1.5454.1.40.1.13.4		sysipconfigChange	Activates IP address change
1.3.6.1.4.1.5454.1.40.2.1		rfPeerDeviceID	Configure PeerID
1.3.6.1.4.1.5454.1.40.2.2		rfActiveChannel	Displays current channel
1.3.6.1.4.1.5454.1.40.2.3		rfActivePolarization	Displays current antenna polarization
1.3.6.1.4.1.5454.1.40.2.4		rfSpeed	Displays current Speed setting
1.3.6.1.4.1.5454.1.40.2.5		rfTxPower	Displays current transmit power (dBm)
1.3.6.1.4.1.5454.1.40.1.14		sysRemarks	Display radios remarks
	Objects for Link and Association Monitoring
1.3.6.1.4.1.5454.1.40.2.12		rfRSSI	Displays RSSI value (dBm)
1.3.6.1.4.1.5454.1.40.2.13		rfAssociated	Displays current association status
			(0 = disassociated,1 = associated)
1.3.6.1.4.1.5454.1.40.3.2		ruReboot	Reboots RU
1.3.6.1.4.1.5454.1.40.3.3		ruDistance	Displays current ru distance
	Objects for Bandwidth Monitoring
1.3.6.1.4.1.5454.1.40.1.9.1		systrafficEthInOctets	Displays Ethernet in (bytes)
1.3.6.1.4.1.5454.1.40.1.9.2		systrafficEthOutOctets	Displays Ethernet out (bytes)
1.3.6.1.4.1.5454.1.40.1.9.3		systrafficRfInOctets	Displays RF in (bytes)
1.3.6.1.4.1.5454.1.40.1.9.4		systrafficRfOutOctets	Displays RF out (bytes)
	Objects for Alarm Monitoring
1.3.6.1.4.1.5454.1.40.3.4.1.1		trapTrapDstEntry
1.3.6.1.4.1.5454.1.40.3.4.1.2		trapTrapDstEnabling	Enable/Disable trap
1.3.6.1.4.1.5454.1.40.3.4.2		trapTrapIpAddress	Set destination trap IP
1.3.6.1.4.1.5454.1.40.3.4.3		trapTrapCommStr	Set trap community string
	Trango Broadband Wireless — TrangoLINK-45			page 38