Texas Memory Systems RamSan-500 manual Web Monitor RAID Degraded Detection

Page 44

Figure 32 – Web Monitor RAID Degraded Detection

WARNING

MAKE CERTAIN THAT FLASH MODULES ARE POWERED OFF BEFORE REMOVING.

The Web monitor reports higher-level information about a RAID that has a missing or bad Flash module. Figure 32 above shows the RAID information generated by removing the same Flash drive as shown in Figure 31. In this case, the removed module causes the RAID to be degraded, meaning the RAID cannot tolerate another Flash module error without data loss – but the RAID is still usable.

RamSan-500 User’s Manual

44 of 48

Image 44
Contents RamSan-500 User’s Manual Revision History Table of Contents Power IntroductionOverview System ComponentsReliability System ManagementReviewing your shipment UnpackingSystem Overview System InspectionRack mounting RamSan-500 BackFibre Channel Interface Installing a Host Bus Adaptor in the Host SystemConnections Connecting the Fibre Channel Ports Host Bus AdapterPCI Bus 4 CPUConnecting to a Network Fibre Channel Port LocationsAC Voltage Indicator Light Connecting Power to the SystemPower Switches System Initialization Getting StartedTurning on the System Front Panel Display Basics Controlling System Power with the Front Panel Display Manual ShutdownFlash Modules Identify Module Module Automatic Shutdown Network Configuration with the Front Panel DisplayManual Restart Dhcp Ethernet IP address 192.000.000.000 Connecting using a Terminal Program Additional System Management OptionsConnecting using Telnet Connecting using SnmpConnecting using the Web Monitor Web Monitor BasicsAccessing the Web Monitor Acquiring the System IP AddressWeb Monitor Information Date and time setup with the Web monitor Network Configuration with the Web Monitor Web Monitor Network ManagementManaging security with the Web Monitor Default AccountsChanging Passwords RamSan-500 User’s Manual Creating a LUN Basic LUN CreationAdding Users RamSan-500 User’s Manual Adding an Access Policy to a LUN RamSan-500 User’s Manual Configuring the RamSan-500 Cache Web Monitor Cache ConfigurationViewing the Logs with the Web Monitor RamSan-500 User’s Manual Web Monitor System Report Upgrading the System with the Web Monitor Web Monitor Patch SelectionClearing the System Event Log If the System has a ProblemContacting Texas Memory Systems RamSan-500 User’s Manual Contacting Texas Memory Systems System MaintenancePower Supplies Replace Failed Power Modules AS Soon AS Possible Flash Modules Flash Module Failure OFFWeb Monitor Flash Module Failure Detection Web Monitor RAID Degraded Detection RAID Failure Fans RamSan-500 User’s Manual Batteries