Texas Memory Systems RamSan-500 manual Additional System Management Options

MAC address. Use this value to configure your DHCP server.

Re-enter the “Network Config” menu, then “Set IP Config” menu and select “DHCP”.

The next screen commits the changes and automatically restarts the network.

You should witness the network restarting.

The final screen displays the IP address assigned by the DHCP server.

Set IP Config

￿DHCP

Use DHCP for IP?

↓Yes ↑ No

Restarting

Network... Done

New IP Address: 192.168.111.58

If the network fails to start, check the Ethernet connection and contact your system administrator. If the system successfully saved the IP configuration, you may simply select the “Restart Network” option from the “Ethernet Setup” menu instead of re-selecting the same IP configuration.

4.6Additional System Management Options

4.6.1Connecting using a Terminal Program

To connect to the RamSan-500 using a serial port connection, use a dumb terminal or a terminal emulation program such as Windows™ HyperTerminal. Set your baud rate to 9600 with 8 data bits, 1 stop bit, no parity, and no flow control. Connect to the serial port using a DB-9 non-null serial cable.

RamSan-500 User’s Manual 20 of 48