Texas Memory Systems RamSan-500 manual Identify Module Module

Page 16

menu and choose the “Identify Module” option.

Next, scroll down the Identify Module sub-menu to choose the module that you wish to Identify. After a Module is selected it Status Indicator LED will slowly blink Orange for four second and then return to its previous state.

Identify Module ￿ Module 1

Once the appropriate module has been identified it may be powered off from the front panel.

To power off a particular module, use the arrow buttons to cycle through the top-level menu to select “Flash Modules”. Use the Select button to select this menu item.

Main Menu

￿ Flash Modules

To choose a particular Flash module to power off, scroll through the Flash Module sub- menu and choose the “Power Off Module” option.

Flash Modules

￿ Power off Module

Next, scroll down the Power Off Module sub-menu to choose the module that you wish to power off.

Power Off Module ￿ Module 1

The display prompts you to confirm that you wish to power off the module. To cancel the module power off, use the button to return to the main menu. To proceed with the module power off, use the button to confirm.

Power Off Module 1? Yes No

You can then exit from the Flash Module sub-menu and remove the chosen module.

Flash Module Menu

￿Exit

RamSan-500 User’s Manual

16 of 48

Image 16
Contents RamSan-500 User’s Manual Revision History Table of Contents Power IntroductionOverview System ComponentsReliability System ManagementReviewing your shipment UnpackingSystem Overview System InspectionRack mounting RamSan-500 BackConnections Installing a Host Bus Adaptor in the Host SystemFibre Channel Interface Connecting the Fibre Channel Ports Host Bus AdapterPCI Bus 4 CPUConnecting to a Network Fibre Channel Port LocationsPower Switches Connecting Power to the SystemAC Voltage Indicator Light Turning on the System Getting StartedSystem Initialization Front Panel Display Basics Controlling System Power with the Front Panel Display Manual ShutdownFlash Modules Identify Module Module Manual Restart Network Configuration with the Front Panel DisplayAutomatic Shutdown Dhcp Ethernet IP address 192.000.000.000 Connecting using a Terminal Program Additional System Management OptionsConnecting using Telnet Connecting using SnmpConnecting using the Web Monitor Web Monitor BasicsAccessing the Web Monitor Acquiring the System IP AddressWeb Monitor Information Date and time setup with the Web monitor Network Configuration with the Web Monitor Web Monitor Network ManagementChanging Passwords Default AccountsManaging security with the Web Monitor RamSan-500 User’s Manual Adding Users Basic LUN CreationCreating a LUN RamSan-500 User’s Manual Adding an Access Policy to a LUN RamSan-500 User’s Manual Configuring the RamSan-500 Cache Web Monitor Cache ConfigurationViewing the Logs with the Web Monitor RamSan-500 User’s Manual Web Monitor System Report Upgrading the System with the Web Monitor Web Monitor Patch SelectionContacting Texas Memory Systems If the System has a ProblemClearing the System Event Log RamSan-500 User’s Manual Power Supplies System MaintenanceContacting Texas Memory Systems Replace Failed Power Modules AS Soon AS Possible Flash Modules Flash Module Failure OFFWeb Monitor Flash Module Failure Detection Web Monitor RAID Degraded Detection RAID Failure Fans RamSan-500 User’s Manual Batteries