Teledex IP250DVoIP manual Download Configuration, Reset Configuration, Snmp Settings

Page 15

CONFIGURING THE IP250D

3.6.3 SNMP Settings

This sub-page is used for configuring the device’s SNMP server. Configure the SNMP Trap Host IP address and community, the SNMP read and write community parameters, and the SNMP System Description and System Object ID parameters. Press Save SNMP Settings to apply the new values. These settings will only take effect when the device is rebooted.

3.7 DOWNLOAD CONFIGURATION

This page provides two options for downloading a new firmware application image to the device. If you wish to download the new firmware image using TFTP, enter the filename of the ROM image and enter the IP address of the TFTP server on which this file resides. Press START TFTP DOWNLOAD to initiate the TFTP download process.

If the ROM image is stored on the same local machine you are using to access the device’s web pages, you can choose to download the ROM file to the device using an HTTP post. Enter the filename of the ROM image or press BROWSE to help locate the file. Press START HTTP DOWNLOAD to initiate the HTTP download process. If the main application is executing at the time, the device will automatically reboot itself into the downloader mode and begin the download process. If the downloader application is executing at the time, the download process will begin. The download status will be displayed when the image download process is complete. Please refer to Section 6, The Downloader Application for more details on the download process.

3.8 RESET CONFIGURATION

This page provides options for resetting the device. Select whether you wish to reset the device and start executing the main (default) application, or whether you wish to reset the device and start executing the internal downloader application. Press RESET to reset the device.

Teledex IP250D User’s Guide SIP/MGCP

10

 

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents VoIP Network Terminal IP250DImportant Safety Instructions 89/336/EEC Requirements of Part 15 FCC Rules European RequirementsContents Introduction to the IP250D VoIP Network Terminal Downloader Application IP250D Works Like a Telephone Introduction to the Teledex IP250D VoIP Network TerminalInstalling the IP250D Unpacking the IP250D Connecting the HandsetConnecting the IP250D to the Network Connecting a PC to the IP250DConnecting a Headset to the IP250D Arranging the IP250D on the DeskMounting the IP250D on a Wall Home Configuring the IP250DVlan Settings LAN ConfigurationMgcp Configuration LAN Interface SettingsOOB Signalling Settings Mgcp SettingsSIP Configuration Handset SettingsSIP Settings Localization Settings Codec ConfigurationSystem Configuration Security SettingsDownload Configuration Reset ConfigurationSnmp Settings Receiving a Call Using the IP250DTelephone Idle Incoming Call NotificationPlacing a Call Dtmf Signaling Terminating a CallHeadset and Speakerphone Usage Hold and Multiple Lines Teledex IP250D User’s Guide SIP/MGCP Forwarding ALL Calls Muting a CallTransferring a Call Redialing the Last Number DialedChanging Ringing Sounds Using the Msgs KEYConfiguring Local Speed Dial Numbers Making Conference CallsNetwork Troubleshooting Troubleshooting and CareBasic Troubleshooting Measures General TroubleshootingSymptom SIP-SPECIFIC Issues MGCP-SPECIFIC IssuesExecuting the Downloader Application Cleaning the IP250DUsing the Downloader Application Downloader ApplicationAppendix B Safe Bootup Modes Appendix a Determining the IP AddressDownload of the new firmware image ’SAFE’ Modes on AN IP Phone Appendix C Restoring Factory DefaultsAppendix D Dial Plans Appendix E Tone and Ring Cadence Configuration Tone ConfigurationSample Dial Plans CUSTOM3 CUSTOM4 CUSTOM5 CUSTOM6 CUSTOM7 CUSTOM8 CUSTOM9 Example Tone ConfigurationsExample Ring Cadence Configuration Ring Cadence ConfigurationAppendix F IP250D Product Specifications Appendix G Product Support
Top Page Image Contents