Teledex IP250DVoIP manual Symptom

Page 24

TROUBLESHOOTING AND CARE

SYMPTOM:

The device’s Web pages are not accessible.

SOLUTION A:

Ensure that the ethernet cable connection is secure, and that the link

 

indicators at both ends of the ethernet cable are active.

SOLUTION B:

Try pinging the phone’s IP address from any Unix or Windows machine

 

connected to the same network. Type:

 

ping www.xxx.yyy.zzz [Enter]

 

(where www.xxx.yyy.zzz is the IP address of the unit).

SYMPTOM:

The device does not respond to pings.

SOLUTION A:

Ensure that the ethernet cable connection is secure, and that the link

 

indicators at both ends of the ethernet cable are active.

SOLUTION B:

Verify that the DHCP server on the network is functioning.

SOLUTION C:

If you do not have a DHCP server, or want to use a fixed IP address instead,

 

you need to reconfigure the device to use a static network assignment

 

(refer to section 3.2.1).

SYMPTOM:

The LCD displays "Acquiring IP Address" indefinitely.

SOLUTION A:

The unit is trying to acquire a DHCP IP address. Ensure that the ethernet

 

cable connection is secure, and that the link indicators at both ends of the

 

ethernet cable are active.

SOLUTION B:

Verify that the DHCP server on the network is functioning.

SOLUTION C:

If you do not have a DHCP server, or want to use a fixed IP address instead,

 

you need to reconfigure the device to use a static network assignment

 

(refer to section 3.2.1).

SYMPTOM:

The automatic DNS discovery process for a VoIP server (MGCP call control

 

agent or SIP server) does not appear to work.

SOLUTION A:

Ensure that the DNS server is capable of servicing DNS TXT or SRV

 

queries, and that it is configured to respond with the correct server

 

information when queried.

SOLUTION B:

If the device is configured via DHCP, ensure that the DHCP server has

 

provided the correct DNS server and domain name information.

SOLUTION C:

If the device network information has been statically assigned (i.e. not via

 

DHCP), ensure that the DNS server IP address is correct, and that the

 

network domain name has been provided and is correct.

SYMPTOM:

The web browser complains often about errors on the page.

SOLUTION :

Ensure that the web browser supports frames and that javascript is enabled.

 

Although the device’s internal web pages should be accessible from most

 

modern web browsers, Teledex recommends using Internet Explorer 4.0 or

 

higher, or Netscape 4.0 or higher for optimal results.

19 Teledex IP250D User’s Guide SIP/MGCP

Part Number 600-0480-60

Image 24
Contents IP250D VoIP Network TerminalImportant Safety Instructions Requirements of Part 15 FCC Rules European Requirements 89/336/EECContents Introduction to the IP250D VoIP Network Terminal Downloader Application Introduction to the Teledex IP250D VoIP Network Terminal IP250D Works Like a TelephoneInstalling the IP250D Connecting the Handset Connecting the IP250D to the NetworkConnecting a PC to the IP250D Unpacking the IP250DConnecting a Headset to the IP250D Arranging the IP250D on the DeskMounting the IP250D on a Wall Configuring the IP250D HomeLAN Configuration Mgcp ConfigurationLAN Interface Settings Vlan SettingsMgcp Settings OOB Signalling SettingsSIP Configuration Handset SettingsSIP Settings Codec Configuration System ConfigurationSecurity Settings Localization SettingsDownload Configuration Reset ConfigurationSnmp Settings Using the IP250D Telephone IdleIncoming Call Notification Receiving a CallPlacing a Call Dtmf Signaling Terminating a CallHeadset and Speakerphone Usage Hold and Multiple Lines Teledex IP250D User’s Guide SIP/MGCP Muting a Call Transferring a CallRedialing the Last Number Dialed Forwarding ALL CallsUsing the Msgs KEY Configuring Local Speed Dial NumbersMaking Conference Calls Changing Ringing SoundsTroubleshooting and Care Basic Troubleshooting MeasuresGeneral Troubleshooting Network TroubleshootingSymptom MGCP-SPECIFIC Issues SIP-SPECIFIC IssuesCleaning the IP250D Using the Downloader ApplicationDownloader Application Executing the Downloader ApplicationAppendix B Safe Bootup Modes Appendix a Determining the IP AddressDownload of the new firmware image Appendix C Restoring Factory Defaults ’SAFE’ Modes on AN IP PhoneAppendix D Dial Plans Appendix E Tone and Ring Cadence Configuration Tone ConfigurationSample Dial Plans Example Tone Configurations CUSTOM3 CUSTOM4 CUSTOM5 CUSTOM6 CUSTOM7 CUSTOM8 CUSTOM9Ring Cadence Configuration Example Ring Cadence ConfigurationAppendix F IP250D Product Specifications Appendix G Product Support