Teledex IP250DVoIP manual Making Conference Calls, Using the Msgs KEY, Changing Ringing Sounds

Page 22

USING THE IP250D

4.13 MAKING CONFERENCE CALLS

During a call, press the CONF key. This will automatically select a new line and place the original party on hold. Dial the second party; when they are connected, press the CONF key to add this party to the call. As many people as the system allows may be added to the call. Once you (as the initator of the conference) drop from the conference, the call is ended.

4.14 USING THE MSGS KEY

Voice mail should be set up according to instructions from the system the IP250D is running on. To connect to voice mail, press the MSGS key and follow the voice prompts or instrcutions provided by your system administrator..

4.15 CHANGING RINGING SOUNDS

To change the volume of the ringer, press the either VOLUME key while on hook. Adjust to the desired volume setting, and then press the PGM Key to set the volume. The ring tone can be selected via the SETTINGS menu. Press the SETTINGS key to access the SETTINGS menu. Follow the sequence: press 1 to enter PHONE SETUP mode; press 2 to enter RINGER mode; press 1 to enter RINGER TONES, then set the ring tone. Select from numbers 1 through 8 to choose the desired ring tone.

4.16 CONFIGURING LOCAL SPEED DIAL NUMBERS

To program configurable autodial keys for numbers:

1)Press the PGM key

2)Dial the number you want to store

3)Press the memory dialing key where you want to store the number

4)Press the PGM key again to complete the process.

17 Teledex IP250D User’s Guide SIP/MGCP

Part Number 600-0480-60

Image 22

Contents IP250D VoIP Network TerminalImportant Safety Instructions Requirements of Part 15 FCC Rules European Requirements 89/336/EECContents Introduction to the IP250D VoIP Network Terminal Downloader Application Introduction to the Teledex IP250D VoIP Network Terminal IP250D Works Like a TelephoneInstalling the IP250D Connecting a PC to the IP250D Connecting the HandsetConnecting the IP250D to the Network Unpacking the IP250DArranging the IP250D on the Desk Connecting a Headset to the IP250DMounting the IP250D on a Wall Configuring the IP250D HomeLAN Interface Settings LAN ConfigurationMgcp Configuration Vlan SettingsMgcp Settings OOB Signalling SettingsHandset Settings SIP ConfigurationSIP Settings Security Settings Codec ConfigurationSystem Configuration Localization SettingsReset Configuration Download ConfigurationSnmp Settings Incoming Call Notification Using the IP250DTelephone Idle Receiving a CallPlacing a Call Terminating a Call Dtmf SignalingHeadset and Speakerphone Usage Hold and Multiple Lines Teledex IP250D User’s Guide SIP/MGCP Redialing the Last Number Dialed Muting a CallTransferring a Call Forwarding ALL CallsMaking Conference Calls Using the Msgs KEYConfiguring Local Speed Dial Numbers Changing Ringing SoundsGeneral Troubleshooting Troubleshooting and CareBasic Troubleshooting Measures Network TroubleshootingSymptom MGCP-SPECIFIC Issues SIP-SPECIFIC IssuesDownloader Application Cleaning the IP250DUsing the Downloader Application Executing the Downloader ApplicationAppendix a Determining the IP Address Appendix B Safe Bootup ModesDownload of the new firmware image Appendix C Restoring Factory Defaults ’SAFE’ Modes on AN IP PhoneAppendix D Dial Plans Tone Configuration Appendix E Tone and Ring Cadence ConfigurationSample Dial Plans Example Tone Configurations CUSTOM3 CUSTOM4 CUSTOM5 CUSTOM6 CUSTOM7 CUSTOM8 CUSTOM9Ring Cadence Configuration Example Ring Cadence ConfigurationAppendix F IP250D Product Specifications Appendix G Product Support