Timex user manual VII. Installing the T100, Wall Mounting Template, Wall-mounting

Page 21

VII. Installing the T100

The T100 may be installed on a flat surface or wall-mounted. No special wiring is needed. However, we recommend installing the T100 on a separate power circuit. We do not recommend using a power strip. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock.

Wall-mounting

1.Using Wall Mounting Template install screw (included) in wall at position A, 37” to 49” above floor. Leave a 1/8” gap between the screw head and wall. Use a screw anchor (included) if necessary.

Wall Mounting

Template

2.Install screws (included) at positions B and C with 1/8” gap between the screw head and wall. Install screw anchors (included) if necessary.

3.Use two M4X10 screws (included) to attach the wall-mounting bracket to the bottom of the T100.

18

Image 21

Contents Page Time Clocks Table of Contents Overview IntroductionFeatures SpecificationsAccessories Template FrontBack III. Location of ComponentsIV. Quick Setting the T100 Default SettingsSetting Programming Outline Setting the T100Programming Hints Enter Programming ModeTo Set Weekly Pay Periods Setting Pay Period and Current Print LineSetting 12- or 24- Hour Print Format Setting Year, Month, and Date Date may be set usingSetting the Minute Printing Format Setting the Day Change TimeSetting Time Zone Daylight Saving Time DST Inputting the Default PasswordIN1 OUT1 Setting Two-Color PrintingIN1 OUT1 Event Max Signal Tone Description Setting the Signal Tone TimesSetting Signal Duration Exiting Program Mode Changing the Default PasswordPunching Time Card VI. Operating the T100VII. Installing the T100 Wall Mounting TemplateWall-mounting Page Replacing the ribbon VIII. MaintenanceProblem Possible Cause Check IX. TroubleshootingLocation of fuses Error CodesWarranty Product Registration Card 06-0337-000 Rev. C