SOYO SOYOTM manual PNP/PCI Configuration Setup, Primary/Secondary, Ide, Parallel Port

BIOS Setup 31

Primary/Secondary	Choose Enabled or Disabled (default).
IDE 0	Enabled Ð Enables the power management
Primary/Secondary	timers when Òno activityÓ event is
IDE 1	detected.
Floppy Disk/	Choose Enabled or Disabled.
Serial Port/	Enabled Ð enables the power management
Parallel Port	timers when Òno activityÓ event is
	detected.

3.After you have finished with the Power Management Setup, press the <ESC> key to return to the Main Menu.

PNP/PCI Configuration Setup

This option sets the mainboardÕs PCI Slots. Run this option as follows:

1.Choose ÒPNP/PCI CONFIGURATION SETUPÓ from the Main Menu and the following screen appears. (The screen below shows default settings.)

ROM PCI/ISA BIOS

PNP/PCI CONFIGURATION

AWARD SOFTWARE, INC.

Resources Controlled			By : Manual	PCI IDE IRQ Map To			: PCI-AUTO
Reset Configuration Data : Disabled				Primary		IDE INT# : A
				Secondary IDE INT# : B
IRQ-3	assigned	to : Legacy ISA*
IRQ-4	assigned	to : Legacy ISA*		Used MEM Base Addr			: N/A
IRQ-5	assigned	to : PCI/ISA PnP*
IRQ-7	assigned	to : PCI/ISA PnP*
IRQ-9	assigned	to : PCI/ISA PnP*
IRQ-10 assigned		to : PCI/ISA PnP*
IRQ-11 assigned		to : PCI/ISA PnP*
IRQ-12 assigned		to : PCI/ISA PnP*
IRQ-14 assigned		to : PCI/ISA PnP*
IRQ-15 assigned		to : PCI/ISA PnP*
DMA-0	assigned	to : PCI/ISA PnP*		ESC : Quit		− ↓ → ←: Select Item
DMA-1	assigned	to : PCI/ISA PnP*		F1	: Help	PU/PD/+/– : Modify
DMA-3	assigned	to : PCI/ISA PnP*
				F5	: Old Values (Shift)F2 : Color
DMA-5	assigned	to : PCI/ISA PnP*		F6	: Load BIOS Defaults
DMA-6	assigned	to : PCI/ISA PnP*		F7	: Load Setup Defaults
DMA-7	assigned	to : PCI/ISA PnP*

*: These items will disappear when Resource Controlled. is Auto.

2.Use the arrow keys to move between items and select values. Modify selected fields using the PgUp/PgDn/+/Ð keys.