SOYO SOYOTM manual Pci Irq, Pci Ide Irq, Int#

32 BIOS Setup

A short description of screen items follows:

Resources	Manual Ð BIOS doesnÕt manage PCI/ISA PnP
Controlled By	card (i.e., IRQ) automatically.
	Auto Ð BIOS auto manage PCI and ISA PnP
	card (recommended).
Reset	Disabled Ð Retain PnP configuration data in
Configuration	BIOS.
Data	Enabled Ð Reset PnP configuration data in
	BIOS.
IRQX and	Choose PCI/ISA PnP or Legacy ISA. If the first
DMAX assigned	item is set to Manual, you could choose IRQX
to	and DMAX assigned to PCI/ISA PnP card or ISA
	card.
PCI IRQ	Choose Edge or Level. Most PCI trigger signals
Activated By	are Level. This setting must match the PCI card.
PCI IDE IRQ	Select PCI-AUTO, ISA, or assign a PCI SLOT
Map To	number (depending on which slot the PCI IDE is
	inserted). The default setting is PCI-AUTO. If
	PCI-AUTO does not work, then assign an
	individual PCI SLOT number.
Primary IDE	Choose INTA#, INTB#, INTC#, or INTD#. The
INT#	default setting is INTA#.
Secondary IDE	Choose INTA#, INTB#, INTC#, or INTD#. The
INT#	default setting is INTB#.
Used MEM Base	Choose C800, CC00, D000, D400, D800, or
Addr	DC00 for setting the I/O address of your add-on
	card. You should ask your add-on card dealer for
	the exactly I/O address. Use this function only
	when problems occur while using the add-on
	card.

3.After you have finished with the PCI Slot Configuration, press the <ESC> key and follow the screen instructions to save or disregard your settings.