SCSI Utilities
SY-D6IBA2 Quick Start Guide
To enter driver-specific parameters, follow these steps:
1Select [Run] from the File menu (Windows NT 3.5x), or Run form the Start button (Windows NT 4.0).
2Type regedt32 and press [Enter].
3Open the registry list to the following location:
\HKEY_LOCAL_MACHINE\System\CurrentCJontrolSet\Services\aic78xx\Parameters\Device\Driv erParameters
or
\HKEY_LOCAL_MACHINE\System\CurrentCJontrolSet\Services\aic78u2\Parameters\Device\Driv eParameters
If the \Parameters\Device\DriverParameters keys already exist, skip to step 10 below to begin entering parameters. If the keys do not yet exist, you will need to create them by continuing with step 4.
4Click on the aic78xx or aic78u2 key.
5Select Add Key from the Edit menu; Type Parameters in the Key Name edit box. Leave the Class edit box blank.
6Click on the Parameters key.
7Select Add Key from the Edit menu; Type Device in the Key Name edit box. Leave the Class edit box blank.
To specify a certain host adapter, append Device with the number of the host adapter. For example, type Device0 for the first host adapter, jDevice1 for the second, etc. If you omit the host adapter number, the configuration information applies to all 7800 Family host adapters.
8Click on the Device key.
9Select Add Value from the Edit menu; type DriverParameters in the Key Name edit box. Enter REG_SZ as the Data Type and press [Enter].
10A String Editor text box appears. Enter valid parameters in the text box. When entering multiple parameters, each parameter must be separated by a space.
Note: Changes made with the Registry Editor do not take effect until you shut down and then restart your system.
28