SOYO SY-D61BA2 quick start Connectors and Plug-ins, Make Connections to the Motherboard

SY-D6IBA2Quick Start Guide

Note: Installing a heat sink and cooling fan on top of your CPU is necessary for proper heat dissipation. Failing to install these items may result in overheating and possible burn-out of your CPU.

Step 2. Make Connections to the Motherboard

This section tells how to connect internal peripherals and power supply to the Motherboard. Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.

For more details on how to connect internal and external peripherals to your new SY- D6IBA2 Motherboard, please refer to SY-D6IBA2 Motherboard User's Guide and Technical Reference online manual on CD-ROM.

Connectors and Plug-ins

PCI Audio Card Header: SB-Link ™ (PC-PCI)	Wake-On-LAN Header: JP44
Connect the SB-Link ™ (PC-PCI) cable from your PCI audio	Pin1	Pin2	Pin3
card to this header.
	5VSB	GND	MP-Wakeup

	Slot 1 #1 CPU				Slot 1 #2 CPU		Chassis Fan: FAN 3
Cooling Fan: FAN 1				Cooling Fan: FAN 2
Pin1		Pin2	Pin3	Pin1	Pin2	Pin3	Pin1	Pin2		Pin3
GND		12V SENSOR		GND	12V SENSOR		GND	12V	SENSOR
Power LED Key Lock			Speaker		Power LED			Keylock
+	_		+	_	Pin1	Pin2	Pin3	Pin1		Pin2
					5V	NC	GND Control Pin			GND
			+ _ + _				Speaker
					Pin1	Pin2	Pin3			Pin4
Reset					5V	NC	NC	Speaker out
		PWRBT Turbo LED HDD LED
	HDD LED		Turbo LED			PWRBT		RESET
Pine1		Pin2	Pin1		Pin2	Pin1	Pin2	Pin1		Pin2
LED Anode		LED	LED		GND	Power	GND	Power		GND
		Cathode	Cathode			On/Off		Good
			IrDA (Infrared Device Header): IR1
	Pin1		Pin2		Pin3		Pin4	Pin5
	VCC		None		IRRX		GND	IRTX
ATX Power On/Off: PWRBT					ATX Power Supply: ATX PW
Connect your power switch to this					Attach the ATX Power cable to this connector.
header (momentary switch type).					When using the Power-On by PS/2 Keyboard
To turn off the system,					function, please make sure the ATX power supply
please press this switch and hold					can take at least 720mA load on the 5V Standby lead
down for longer than					(5VSB) to meet the standard ATX specifications.
4 seconds.

Hardware Installation

7