SOYO SY-D61BA2 quick start Updating the Driver for Windows 95 Version OSR2

Page 21

SY-D6IBA2Quick Start Guide

Updating the Driver for Windows 95 (Version OSR2)

This section covers the remaining steps for updating the drives.

1.Follow steps 1 through 7 in the Previous section, Installing the Driver When Windows 95 is Already Installed.

2.Click [Update Drivers].

3.In the Update Device Driver Wizard, select [Yes], then click [Next].

4.Under Location type a:\win95, then click [OK].

5.Click [Finish].

6.The message Please insert the disk labeled ‘7800 Family Manager Set v.3.01 Installation Disk’ appears dialog box. Click [OK].

7.In the Copying Files dialog box, a message starting that ‘The file AIC 78XX.MPD or AIC78U2.MPD on 7800 Family Manager Set V3.01 installation disk could not be found …’appears. Type a:\win95 and click [OK] to install the driver.

8.Click [Yes] to restart you computer to update the changes. To return to the System Properties windows, click [OK].

Note: If you wish to re-update the driver again, you must select No at step 3 above, then click Next and follow the onscreen instruction \s to re-update.

SCSI Utilities

21

Image 21
Contents Quick Start Guide SY-D6IBA2 Motherboard Unpacking IntroductionJP1 FAN1 FAN2 SY-D6IBA2 Motherboard LayoutPreparations InstallationInstall the CPU Install the MotherboardMake Connections to the Motherboard Connectors and Plug-insConfigure Memory Enable/Disable Power-On by PS/2 Keyboard JP1Set the CPU Frequency Power Button Power Button Enable JP7Enable JP7 SettingSY-D6IBA2Quick Start Guide Select Load Setup Default Quick Bios SetupSelect Standard Cmos Setup Select Soyo Combo SetupSoyo CD Insert the Soyo CD into the CD-ROM driveRead Soyo D6IBA2 Manual Back Install DriversFollowing drivers are available for Windows Intel Southbridge Drivers Enter the Soyo CD Check the Latest ReleasesInstalling Scsi Devices Scsi UtilitiesUltra2 Scsi I/O Subsystem Pin Ultra-Wide Scsi Connector Installing the Driver When Installing Windows Scsi Driver Installation Windows 95 UsersSY-D6IBA2Quick Start Guide Updating the Driver for Windows 95 Version OSR2 Windows NT Users Installing the Driver When Installing Windows NTCompleting a Fresh Windows NT 4.0 Installation Updating Windows NT Installing the Driver When Windows NT is Already InstalledUpdating Windows NT Using Advanced Configurable ParametersTo enter Windows NT parameters, follow these steps Using Windows NT Scsi ParametersUsing Driver-specific Parameters To enter driver-specific parameters, follow these steps Using Windows NT and the Host Adapter Removing a Host AdapterRemoving a Host Adapter in Windows NT Swapping a Host Adapter To swap adapters, follow these steps SY-D6IBA2 Serial