Socket Mobile CompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology manual

6.If needed, tap on TCP/IP to enter any special network settings for your office network or ISP. Tap OK. In the next screen, tap Next>. Enter the dial-up number for your office network or ISP. Tap Finish.

7.Now you are ready to start the connection.

Go to Start Programs Communication Remote Networking. Tap on your new Bluetooth connection. Enter the correct User Name and

Password. Tap Connect.

8.ONLY FOR MOTOROLA TIMEPORT 270C OR NOKIA 3650/6310/7650/8910/8910i:

a)After you tap Connect for the first time, the phone will display a message asking if you want to bond. On Motorola, enter GRANT; on Nokia, enter ACCEPT.

b)Make up a 4-16 digit passkey, enter it on the phone, then enter it on the handheld PC.

Note: The Bluetooth icon on the Today screen will blink to indicate a connection.

d. After successfully bonding with your phone, you may want to set up your phone to automatically bond with your Pocket PC without requiring a passkey every time. This option is available with some Motorola and Nokia phones. See Appendix C, “Automatic Phone Connections,” for instructions.

9.To use a different Bluetooth phone for dial-up networking, you can use the same connection setup, but you must make the new phone your favorite. Just run the Get Connected! Wizard again, select the new phone, and make it your new Favorite when prompted. Or you can use the Bluetooth Devices folder to change your favorite phone (see Chapter 4 for instructions).

CHAPTER 2: BASIC SETUP 27