Socket Mobile CompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology Basic Setup

Page 7

Chapter 2 Basic Setup

This chapter covers the minimum steps you must complete to install and use the Bluetooth Card.

STEP 1: Register the Card

Socket highly recommends that all users register their product. Registered users receive priority for technical support. You can register the card online at: www.socketcom.com/prodreg/.

STEP 2: Prepare Network Information

Consult with your network administrator/MIS technician to obtain any necessary settings for your network (e.g. IP addresses, dial-up number, user name, password, etc.).

STEP 3: Install the Software

Follow these steps to install the software BEFORE inserting the Socket card.

1.Use ActiveSync and a serial/Ethernet/USB cable or cradle to make an active connection between the mobile computer and a host PC.

2.Insert the Bluetooth Connection Kit Installation CD into the host PC.

3.Use My Computer or Windows Explorer to access your CD-ROM drive. In the CD, click on SETUP.EXE

4.Follow the instructions on your host computer and mobile computer screens to install the software.

CHAPTER 2: BASIC SETUP 7

Image 7
Contents User’s Guide Table of Contents Limited Warranty Copyright Notice Regulatory Compliance Overview IntroductionPackages Available Contents of the Connection Kit Advanced Features Installation and Usage Steps SummaryInstall the Software Basic SetupRegister the Card Prepare Network Information Complete the Bluetooth Setup Wizard Basic Setup Insert the Card Ericsson, Nokia 6210, NTT DoCoMo, Sony Phones Get ConnectedBasic Setup Motorola Timeport 270C, Nokia 3650/6310/7650/8910/8910i Basic Setup Pocket PC 2000/2002 Dial-up to Your NetworkUncheck Wait for dial tone before dialing. Tap Finish Basic Setup Basic Setup Tap Select Networks Pocket PC Go to Start Settings Connections ConnectionsBasic Setup Baud rate Wait for dial tone before dialing Unchecked Advanced buttonAccept Basic Setup Method 2 Dial Automatically from the Application Basic Setup Uncheck Wait for dial tone before dialing. Tap OK Password. Tap Connect Turn Radio Transmitter ON/OFF FeaturesBluetooth ActiveSync Features Features Bluetooth LAN Access Connected Connected Bluetooth Faxing Features Features Advanced Features Set up Your Bluetooth Card Check Use Authentication to enable the Use Encryption option Assign COM Ports Advanced Features then My Bluetooth DeviceAdvanced Features then Bluetooth Devices Discover Bluetooth DevicesNext Next screen, tap Finish Bond with Discovered Devices Advanced Features View Device Properties Set up Your Favorite Device Change Views Bluetooth Devices, tap on ViewDelete a Device from the Folder Socket Obex Exchange Business Cards Socket Obex Send a Contact Socket Obex Send a File Socket Obex Prepare for File Transfer Browse Remote DeviceSocket Obex Send/Receive Files or Folders Create a Folder Delete Files or Folders Connect/Disconnect Exit Bluetooth File ExplorerReceive Contact or File Enable File SharingAssign a Dialing Prefix Socket DialerUse the Socket Dialer Socket Dialer HPC 2000 only Bluetooth PrintingPocket PC 2000 or Pocket PC Bluetooth Printing Bluetooth Printing CompactFlash Card Appendix a SpecificationsSdio Card Antenna Care Appendix B Safety and Usage TipsAbout Bluetooth and Health Product CareRadio Frequency Exposure Efficient UseDriving AircraftProduct Care and Usage Restrictions Appendix C Automatic Phone Connections Services tab. In the Services Appendix D TroubleshootingUncheck Discoverable Select My Bluetooth DeviceCan’t make my Ericsson R520 phone discoverable Technical Support Appendix E Support ResourcesUsers’ Forum Limited Warranty Limited Software Warranty Socket Communications, Inc Copyright NoticeRadio Frequency Interference Requirements Regulatory Compliance CompactFlash CardApplicable Directives Canada CertificationRadio Frequency Interference Requirements Canada CE Marking & European Union ComplianceApplicable Standards Radio Frequency Interference Requirements FCC Europe R&TTE Directive