Socket Mobile CompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology manual

Page 39

Set up Your Bluetooth Card

Note: If you use the Get Connected! Wizard, which is recommended for normal usage, then this step is not necessary. This step would be used to change the friendly name of your mobile computer.

1.After you insert the Bluetooth Card, the Bluetooth icon should appear in the task tray (visible from the Today screen for Pocket PCs). Tap on the icon.

2.In the pop-up menu, select Advanced Features, then My Bluetooth Device.

Note: If you installed Socket OBEX, the menu will also list Transfer via Bluetooth.

3.In the My Bluetooth Device screen, you can modify the Friendly Name and make any desired configuration changes. When done, tap OK.

Note:

•In normal phone connect operation, Discoverable mode is not needed and should be disabled.

•If you do enable Discoverable mode (e.g., for ActiveSync), note that it does not shut off by itself. To save power, remember to disable it when not needed.

•Connectable, Use Authentication, and Use Encryption are also not required for printing or dial-up networking applications.

CHAPTER 4: ADVANCED FEATURES 39

Image 39

Contents User’s Guide Table of Contents Limited Warranty Copyright Notice Regulatory Compliance Introduction OverviewPackages Available Contents of the Connection Kit Advanced Features Installation and Usage Steps SummaryBasic Setup Install the SoftwareRegister the Card Prepare Network Information Complete the Bluetooth Setup Wizard Basic Setup Insert the Card Ericsson, Nokia 6210, NTT DoCoMo, Sony Phones Get ConnectedBasic Setup Motorola Timeport 270C, Nokia 3650/6310/7650/8910/8910i Basic Setup Pocket PC 2000/2002 Dial-up to Your NetworkUncheck Wait for dial tone before dialing. Tap Finish Basic Setup Basic Setup Tap Select Networks Pocket PC Go to Start Settings Connections ConnectionsBasic Setup Baud rate Wait for dial tone before dialing Unchecked Advanced buttonAccept Basic Setup Method 2 Dial Automatically from the Application Basic Setup Uncheck Wait for dial tone before dialing. Tap OK Password. Tap Connect Turn Radio Transmitter ON/OFF FeaturesBluetooth ActiveSync Features Features Bluetooth LAN Access Connected Connected Bluetooth Faxing Features Features Advanced Features Set up Your Bluetooth Card Check Use Authentication to enable the Use Encryption option Assign COM Ports Advanced Features then My Bluetooth DeviceDiscover Bluetooth Devices Advanced Features then Bluetooth DevicesNext Next screen, tap Finish Bond with Discovered Devices Advanced Features View Device Properties Set up Your Favorite Device Change Views Bluetooth Devices, tap on ViewDelete a Device from the Folder Socket Obex Exchange Business Cards Socket Obex Send a Contact Socket Obex Send a File Socket Obex Prepare for File Transfer Browse Remote DeviceSocket Obex Send/Receive Files or Folders Create a Folder Delete Files or Folders Connect/Disconnect Exit Bluetooth File ExplorerReceive Contact or File Enable File SharingAssign a Dialing Prefix Socket DialerUse the Socket Dialer Socket Dialer HPC 2000 only Bluetooth PrintingPocket PC 2000 or Pocket PC Bluetooth Printing Bluetooth Printing CompactFlash Card Appendix a SpecificationsSdio Card Antenna Care Appendix B Safety and Usage TipsAbout Bluetooth and Health Product CareRadio Frequency Exposure Efficient UseDriving AircraftProduct Care and Usage Restrictions Appendix C Automatic Phone Connections Services tab. In the Services Appendix D TroubleshootingUncheck Discoverable Select My Bluetooth DeviceCan’t make my Ericsson R520 phone discoverable Technical Support Appendix E Support ResourcesUsers’ Forum Limited Warranty Limited Software Warranty Socket Communications, Inc Copyright NoticeRadio Frequency Interference Requirements Regulatory Compliance CompactFlash CardApplicable Directives Canada CertificationRadio Frequency Interference Requirements Canada CE Marking & European Union ComplianceApplicable Standards Radio Frequency Interference Requirements FCC Europe R&TTE Directive