The Low-Pass Filter

The image sensor that acts as the camera’s picture element is fitted with a low-pass filter to prevent moiré. If you suspect that dirt or dust on the filter is appearing in photographs, you can clean the filter using the Clean image sensor option in the setup menu. The filter can be cleaned at any time using the Clean now option, or cleaning can be performed automatically when the camera is turned on or off.

❚❚“CleanNow”

1 Place the camera base down.

Image sensor cleaning is most effective when the camera is placed base down as shown at right.

2 Select Clean image

Gbutton

sensor in the setup

 

menu.

 

Press Gto display the menus. Highlight Clean image sensor in the setup menu and press 2.

n

378

Page 404
Image 404
Nikon 6MB07411-03 Low-Pass Filter, Place the camera base down, Select Clean image, Sensor in the setup Menu, 378