Nikon 6MB07411-03 user manual 323, Live View

Option	Description
	If Sub-command dial is selected, aperture can only be
	adjusted with the sub-command dial (or with the main
	command dial if On is selected for Change main/sub). If
	Aperture ring is selected, aperture can only be adjusted with
Aperture	the lens aperture ring and the camera aperture display will
	show aperture in increments of 1 EV (aperture for type G lenses
setting	is still set using the sub-command dial). Live view is not
	available when Aperture ring is selected and a CPU lens with
	an aperture ring is attached. Note that regardless of the
	setting chosen, the aperture ring must be used to adjust
	aperture when a non-CPU lens is attached.
	If Off is selected, the multi selector is used to choose the
	picture displayed during full-frame playback, highlight
	thumbnails, and navigate menus. If On is selected, the main
	command dial can be used to choose the picture displayed
	during full-frame playback, move the cursor left or right during
Menus	thumbnail playback, and move the menu highlight bar up or
and	down. The sub-command dial is used to display additional
playback	photo information in full-frame playback and to move the
	cursor up or down during thumbnail playback. While menus
	are displayed, rotating the sub-command dial right displays
	the sub-menu for the selected option, while rotating it left
	displays the previous menu. To make a selection, press 2, the
	center of the multi selector, or J.

DLive View

When using a CPU lens equipped with an aperture ring in live view, select Sub-command dial for Aperture setting.

U

323