Nikon 6MB07411-03 user manual

Exposure

Metering	TTL exposure metering using 1,005-pixel RGB sensor
Metering method	• Matrix: 3D color matrix metering II (type G and D
	lenses); color matrix metering II (other CPU lenses);
	color matrix metering available with non-CPU lenses
	if user provides lens data
	• Center-weighted: Weight of 75% given to 12 mm circle
	in center of frame. Diameter of circle can be changed
	to 8, 15, or 20 mm, or weighting can be based on
	average of entire frame (non-CPU lenses use 12-mm
	circle or average of entire frame)
	• Spot: Meters 4 mm circle (about 1.5% of frame)
	centered on selected focus point (on center focus
	point when non-CPU lens is used)
Range (ISO 100, f/1.4	• Matrix or center-weighted metering: 0–20 EV
lens, 20 °C/68 °F)	• Spot metering: 2–20 EV
Exposure meter coupling	Combined CPU and AI
Exposure mode	Programmed auto with flexible program (e); shutter-
	priority auto (f); aperture-priority auto (g); manual (h)
Exposure compensation	–5 – +5 EV in increments of 1/3, 1/2, or 1 EV
Exposure bracketing	2–9 frames in steps of 1/3, 1/2, 2/3, or 1 EV
Flash bracketing	2–9 frames in steps of 1/3, 1/2, 2/3, or 1 EV
White balance	2–9 frames in steps of 1, 2, or 3
bracketing
ADL bracketing	2 frames using selected value for one frame or 3–5
	frames using preset values for all frames
Exposure lock	Luminosity locked at detected value with AE-L/AF-L
	button
ISO sensitivity	ISO 200 – 12800 in steps of 1/3, 1/2, or 1 EV. Can also be
(Recommended	set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO 100 equivalent)
Exposure Index)	below ISO 200 or to approx. 0.3, 0.5, 0.7, 1, 2, or 3 EV
	(ISO 102400 equivalent) above ISO 12800; auto ISO
	sensitivity control available
Active D-Lighting	Can be selected from Auto, Extra high, High, Normal,
	Low, or Off

n

411