Nikon 6MB07411-03 Insert the Battery, Turn the camera off, Remove the battery-chamber cover

Insert the Battery

1 Turn the camera off. Power switch

s

D Inserting and Removing Batteries

Always turn the camera off before inserting or removing batteries.

2Remove the battery-chamber cover.

Lift the battery-chamber cover latch, turn it to the open (A) position (q) and remove the BL-4 battery-chamber cover (w).

3Attach the cover to the battery.

If the battery release is positioned so that the arrow (4) is visible, slide the battery release to cover the arrow. Insert the two projections on the battery into the matching slots in the cover and slide the battery release to reveal the arrow.

DThe BL-4 Battery-Chamber Cover

The battery can be charged with the BL-4 attached. To prevent dust from accumulating inside the battery chamber when the battery is not inserted, slide the battery release in the direction indicated by the arrow (4), remove the BL-4 from the battery, and replace it on the camera. The BL-1 battery-chamber cover for D2-series cameras can not be used.

28