Nikon 6MB07411-03 Portrait Tall-Orientation Photographs, Choose Focus point-selection, 319

Option	Description
	If the Fn button is pressed when the command dials are
	rotated, changes to shutter speed (exposure modes f

v1 step spd/ and h) and aperture (exposure modes gand h) are

aperture made in increments of 1 EV, regardless of the option selected for Custom Setting b2 (EV steps for exposure cntrl., 0 302).

Choose non- Press the Fn button and rotate a command dial to

wCPU lens choose a lens number specified using the Non-CPU

number lens data option (0 214).

xFocus point- Press the Fn button and rotate the command dials for

selection vertical shooting to choose a focus point.

nmenuShootingbank	If this option is selected, the shooting menu bank can
	be selected by pressing the Fn button and rotating a
	command dial.
	If continuous-servo AF (focus mode C; 0 90) is selected
	when dynamic-area AF (I) is chosen for AF-area mode
	(0 92), the number of focus points can be selected by
Dynamic AF	pressing the Fn button and rotating a command dial
I area	(0 296). The focus points used for dynamic-area AF are
	displayed in the viewfinder while the Fn button is
	pressed; if 51 points (3D-tracking)is selected, “3D”
	will be displayed in the viewfinder.
None	No operation is performed when the command dials
	are rotated while the Fn button is pressed.

❚❚Portrait (Tall-Orientation) Photographs

To use the command dials to select the focus point when framing shots in portrait (“tall”) orientation:

1Choose Focus point-selection.

Select Focus point-selection for Custom Setting f4 (Assign Fn

button) > Fn button + command	U
dials.

319