Nikon 6MB07411-03 user manual Measure white balance, Check the results, 161, Flashing a

4Measure white balance.

Before the indicators stop flashing, frame the reference object so that it fills the viewfinder and press the shutter-release button all the way down. The camera will measure a value for white balance and store it in preset d-0. No photograph will be recorded; white balance can be measured accurately even when the camera is not in focus.

5Check the results.

If the camera was able to measure a value for white balance, Cwill flash in the control panels for about six seconds, while the viewfinder will show

a flashing a.	Top control panel
	Rear control panel
	r
	Viewfinder
If lighting is too dark or too bright, the
camera may be unable to measure
white balance. A flashing b a will
appear in the control panels and
viewfinder for about six seconds. Press	Top control panel
the shutter-release button halfway to
return to Step 4 and measure white
balance again.	Rear control panel
	Viewfinder

161