SmartBridges sB3010 manual Root Bridge to Remote Bridge, Root Bridge to Remote Router

i n t e l l i g e n t w i r e l e s s p l a t f o r m

2.5.1 Root Bridge to Remote Bridge

Follow the steps below to change from Root Bridge mode to Remote Bridge mode:

1.Go to Tools System Configuration drop down menu. The System Configuration will be displayed as shown below (Figure 2-8).

2.Alternatively, click on the current device mode link on the top right hand corner to go to the System Configuration page. .

3.Under Current Operational Mode, Select Remote Bridge and click on Apply Changes. A confirmation pop-up window will be displayed.

4.Enter IP Address, IP Mask and Gateway for Ethernet Configuration.

5.Click on the Apply Changes button to change the settings. The device will be rebooted and set to the chosen operational mode.

Figure 2-8 Changing Root Bridge to Remote Bridge

2.5.2 Root Bridge to Remote Router

Follow the steps below to change Root Bridge mode to Remote Router mode

1.Go to Tools System Configuration drop down menu. The System Configuration will be displayed as shown below.

.

2.Alternatively, click on the Current Device Mode link on the top right hand corner to go to the System Configuration page.

3.Choose Router under the Remote Device option. Click on Apply Changes. A confirmation pop-up window will be displayed.

4.Enter IP Address, IP Mask and Gateway for Ethernet and Wireless Configurations.

airHaul™ Nexus User Guide Page 21 of 80