i n t e l l i g e n t | w i r e l e s s | p l a t f o r m |
2.8. Remote Router Configuration
The airHaul units can also be configured to operate as a Remote device to associate to Root Bridge. In Remote mode, the unit can operate as a bridge or a router.
Follow the steps in section 2.7.2 to 2.7.6 to configure the device in Remote Router mode.
2.8.1 Ethernet Configuration
The Ethernet IP is configured during the operational mode change to the Remote Router mode.
Follow these steps below if you need to
1.From the ’Summary Information’ page, click on the ‘Ethernet Configuration’ link to change Ethernet parameters.
2.Enter the ‘IP address’ and ‘IP mask’.
3.Click on the ‘Apply Changes’ button to change the settings.
Figure 2-23 Remote Router Ethernet Configurations
airHaul™ Nexus User Guide | Page 38 of 80 |
|