i n t e l l i g e n t | w i r e l e s s | p l a t f o r m |
Appendix E – SNMP MIB
The airHaul device Mib can be downloaded at http://www.smartbridges.com/support/ah_nexus.asp . It contains all the MIB files used in the device.
How to use the MIB files?
*******************************************************************************
The user can use a MIB browser/compiler (available on the Internet) to convert the text file definitions to the proper OID form. This OID will be of form .1.3.1.6.1.4.1.14882.1.2. etc. The user can use snmpget, snmpset or snmpwalk to obtain and set the various values.
MIB browser errors
*******************************************************************************
The directories contain an exhaustive listing of all the required and dependent MIB files. However , it is possible that at times the MIB browser gives an error that it requires a particular MIB file. This MIB file will be standard MIB files which can be downloaded from the net. They are defined by RFCs and are readily available.
Some MIB browsers may give errors in the NEXUS MIB files
The important MIB files
*******************************************************************************
The
The user can start with these two files first.
Who can access the OIDs
*******************************************************************************
User needs to know the IP address , the community password and the OID name/number to get/set values from/on the device. User may use the OID name (Eg. sbaRadioInterfaceName) or the complete OID number (.1.3.1.6.1.4.1.14882.5.1.16.0)
Caveat
*******************************************************************************
The MIB files may change over time. User should get in touch with the Technical Support group to get the latest MIB files.
Sometimes the MIB browser does not recognize
For more information, please contact the Technical Support Centre at support@smartBridges.com
airHaul™ Nexus User Guide | Page 79 of 80 |
|