SmartBridges sB3010 System Name, System Description, Snmp Security, Delayed Reset, NTP Server

i n t e l l i g e n t w i r e l e s s p l a t f o r m

The following page summarizes the page contents of the System Configuration page.

		Table 7-1 System Configuration
Page Item		Descriptions
System Name		Displays name of airHaul unit
		Allows user to change airHaul unit name
System Description		Displays description of airHaul unit
		Allows user to change airHaul unit description
SNMP Security		Access the SNMP security settings
Reset		Reset device
Delayed Reset		Schedule a reset
NTP Server		NTP server setup, as well as NTP time if server is setup
Software Version		Display the installed firmware version
Radio Firmware		Display the installed radio firmware version
Version
Edit Configuration		Provide links to edit IP, radio, configurations
Reset To Factory		Resets the device to factory default settings
Defaults
Ethernet MTU Size		Set the Ethernet MTU Size
Syslog server IP		Display the current message syslog server IP Address.
Address		User can change the IP address.
SNMP Trap IP		Display the current SNMP trap IP address.
		User can change the IP address.
Log Level		Display the current Log Level
		Suspends/Enables the radio defenders.
		If the Watch Guard is Suspended the defenders will stop for 2 hours and
		start again thereafter.
Watch Guard		If the Watch Guard is enabled the radio defender’s will start immediately.
	Note: The Radio Defenders will monitor the Wireless Association Status
		(automatically) and traffic and take corrective action if needed.
LED Control		Display the current led on status.
		User can change the LED status to on/off
Current		Display the current operational mode.
Operational mode		User can change the current operational mode.

airHaul™ Nexus User Guide Page 57 of 80