i n t e l l i g e n t | w i r e l e s s | p l a t f o r m |
2.6.2 Wireless Configurations
The wireless parameters need to be configured for the Root Bridge device to communicate with other airHaul Remotes.
Follow the steps below to change the Root Bridge Wireless Configurations:
1.From the Summary Information page, click on the Wireless Configuration link.
2.The Radio Configuration page will appear, click on the Wireless Settings link.
3.Enter the SSID of the unit and select the channel.
4.Enter the Remote unit radio’s MAC address in the Client Authorization MAC and designate it as a Bridge or Router. The Client Authorization MAC setting is an ACL and it allows the root device to filter client MAC for association.
5.Select the Transmit power of the radio from
6.Select the gain of the antenna from the drop down menu as per the gain of the antenna being used with the equipment.
7.Enter the RF cable loss based on the cable specifications.
8.Click on the Apply Changes button to change the settings.
Figure 2-15 Root Bridge Wireless Settings
airHaul™ Nexus User Guide | Page 28 of 80 |
|