Silicon Image SSD-DXXX(I)-4210 manual True IDE Multiword DMA Read/Write Access Timing

Page 24

ELECTRICAL SPECIFICATION

SSD-DXXX(I)-4210 DATA SHEET

3.The delay from the activation of -IORD or -IOWR until the state of IORDY is first sampled. If IORDY is inactive, then the host waits until IORDY is active before the PIO cycle can be completed. If the drive is not driving IORDY negated at tA after the activation of -IORD or -IOWR, then t5 must be met and tRD is not applicable. If the drive is driving IORDY negated at the time tA after the activation of -IORD or -IOWR, then tRD must be met and t5 is not applicable.

4.The symbols t7 and t8 apply only to modes 0, 1, and 2. For other modes, this signal is not valid.

5.IORDY is not supported in this mode.

True IDE Multiword DMA Read/Write Access Timing

This function does not apply to SiliconDrive EPs that have DMA disabled.

tM

 

 

 

-CS0, -CS1

 

 

 

 

 

 

t N

 

 

 

tO

DMARQ

 

 

 

(See Note 1)

 

 

t L

 

 

 

-DMACK

 

 

 

(See Note 2)

 

 

tJ

tI

tD

tK

-IORD

 

 

 

-IOWR

tE

 

tZ

Read Data

 

 

 

 

(D15:D00)

 

tF

 

 

 

 

Write Data

 

tG

 

 

 

 

(D15:D00)

 

 

 

 

 

t H

 

 

 

tG

 

Figure 5: True IDE Multiword DMA Read/Write Access Timing

Notes:

1.If the drive cannot sustain continuous, minimum cycle time DMA transfers, it may negate DMARQ within the time specified from the start of a DMA transfer cycle to suspend the DMA transfers in progress, and reassert the signal at a later time to continue the DMA operation.

2.This signal may be negated by the host to suspend the DMA transfer in progress.

SILICONSYSTEMS PROPRIETARY

This document and the information contained within it is confidential and proprietary to SiliconSystems, Inc.

All unauthorized use and/or reproduction is prohibited.

4210D-03DSR

PAGE 15

FEBRUARY 2, 2009

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Features OverviewUpdated Revision HistoryDocument No Release Date Changes AddedTable of Contents ATA Command Set Sales and Support Part Numbering Related DocumentationList of Figures List of Tables Idle Immediate 95h, E1h Part Numbering Nomenclature Physical Specifications Physical DimensionsPin Locations Product Specifications System Power RequirementsSystem Performance SiliconDrive Part# Capacity Service Life GB Written per Day ReliabilityOperational Life Span Product Capacity Specifications Environmental SpecificationsProduct Capacity Number Sectors Bytes Cylinders Heads Track Electrical Specification Pin AssignmentsPin Ultra DMASignal Descriptions Signal Name Pins Type DescriptionData Inputs/Outputs. This is the 8-bit or Disk Active/Slave Present. This openDMA Request. This signal is used for DMA Transfers between the host and deviceThis signal is a DMA request that is used Ground. The device ground signalInterrupt Request. This signal is an active For DMA data transfers between the hostChannel Ready. The signal is negated When Udma mode DMA write is activeWhen Udma mode DMA read is active Device I/O Read. This is the read strobeDevice Power Supply. The device power Symbol Parameter Minimum Maximum UnitsAbsolute Maximum Ratings DC Characteristics Symbol Parameter 5V ± 10% Units Minimum MaximumTrue IDE PIO Mode Read/Write Access Timing True IDE PIO Mode Read/Write Access Timing DiagramTrue IDE PIO Mode Read/Write Access Timing True IDE Multiword DMA Read/Write Access Timing True IDE Multiword DMA Read/Write Access Timing Symbol Mode 0 Mode Mode 3 Mode 4 Note UnitsUltra DMA Data Burst Timing Requirements Initiating a Udma Data-In BurstSustained Udma Data-In Burst Device Terminating a Udma Data-In Burst Host Terminating a Udma Data-In Burst Initiating a Udma Data-Out Burst Device Pausing a Udma Data-Out Burst Host Terminating a Udma Data-Out Burst Device Terminating a Udma Data-Out Burst Udma Data Burst Timing RequirementsMin Max Min. Max Time from Strobe edge to ns Task File Register Specification ATA and True IDE Register DecodingCS0# CS1# DA02 DA01 DA00 Error Register ATA RegistersFeature Register OperationRead/Write ByteRead/Write Sector Count Default Value Sector Count RegisterSector Number Register Read/WriteLogical Block Number bits A07-A00 LBA Addressing Cylinder Low Register LowLogical Block Number bits A15-A08 LBA Addressing Cylinder High Register Logical Block Number bits A23-A16 LBA AddressingDrive/Head Register LBA27 LBA26 LBA25 LBA24Drive Write Fault DWF. Always set to Status RegisterCorrected Data CORR. Always set to Command Register Operation Read/Write ATA Command CodeAlternate Status Register Device Control Register WriteNIEN Read/Write NWTG NHS3 NHS2 NHS1 NHS0 NDS1 NDS0 Default Value Device Address RegisterATA Command Block and SET Description ATA Command Block and Set DescriptionATA Command Set Class Command Name Registers Used CodeATA Command Set Check Power Mode 98h, E5h Check Power Mode 98h, E5hRegister Executive Drive Diagnostic 90h Executive Drive Diagnostic 90hDrive Head Number LBA27-24 Command 50h Format Track 50hFormat Track 50h Identify Drive ECh Identify Drive EChWord Data Default Bytes Data Description Address Identify Drive Drive Attribute DataIdentify Drive Drive Attribute Data Identify Drive Drive Attribute Data Idle 97h, E3h Idle 97h, E3hIdle Immediate 95h, E1h Idle Immediate 95h, E1hInitialize Drive Parameters 91h Initialize Drive Parameters 91hDrive Command 1Xh Recalibrate 1XhRecalibrate 1Xh Read Buffer E4h Read Buffer E4hDrive Head Number LBA27-24 Command C8h Read DMA C8hRead DMA C8h Drive Head Number LBA27-24 Command C4h Read Multiple C4hRead Multiple C4h Drive Head Number LBA27-24 Command 20h or 21h Read Sector 20h, 21hRead Sector 20h, 21h Drive Head Number LBA27-24 Command 22h or 23h Read Long Sectors 22h, 23hRead Long Sectors 22h, 23h Drive Head Number LBA27-24 Command 40h or 41h Read Verify Sectors 40h, 41hRead Verify Sectors 40h, 41h Drive Head Number LBA27-24 Command 7Xh Seek 7XhSeek 7Xh Set Features EFh Set Features EFhSet Features’ Attributes Feature OperationSet Multiple Mode C6h Set Multiple Mode C6hSet Sleep Mode 99h, E6h Set Sleep Mode 99h, E6hStandby 96h, E2h Standby 96h, E2hStandby Immediate 94h, E0h Standby Immediate 94h, E0hWrite Buffer E8h Write Buffer E8hDrive Head NumberLBA27-24 Command CAh Write DMA CAhWrite DMA CAh Drive Head NumberLBA27-24 Command C5h Write Multiple C5hWrite Multiple C5h Drive Head Number LBA27-24 Command 30h or 31h Write Sectors 30h, 31hWrite Sectors 30h, 31h Drive Head Number LBA27-24 Command 32h or 33h Write Long Sectors 32h, 33hWrite Long Sectors 32h, 33h Drive Head Number LBA27-24 Command C0h Erase Sectors C0hErase Sectors C0h Extended Error Codes Extended Error Codes DescriptionRequest Sense 03h Request Sense 03hDrive Head Number LBA27-24 Command 87h Translate Sector 87hTranslate Sector 87h Wear-Level F5h Wear-Level F5hDrive Head Number LBA27-24 Command CDh Write Multiple w/o Erase CDhWrite Multiple w/o Erase CDh Drive Head Number LBA27-24 Command 38h Write Sectors w/o Erase 38hWrite Sectors w/o Erase 38h Drive Head Number LBA27-24 Command 3Ch Write Verify 3ChWrite Verify 3Ch Sales and Support Part NumberingPart Numbering Nomenclature Part NumbersStandard Back Label with Front Label Lot Code InformationRelated Documentation Related DocumentationSiliconDrive EP Application-Specific Description Technology

SSD-DXXX(I)-4210 specifications

The Silicon Image SSD-DXXX(I)-4210 is a cutting-edge solid-state drive designed for high-performance computing applications. Designed to cater to both consumer and enterprise markets, the SSD-DXXX(I)-4210 stands out for its robust features and advanced technologies, making it an ideal choice for those who demand reliability and speed.

One of the key features of the SSD-DXXX(I)-4210 is its exceptional read and write speeds. With read speeds reaching up to 550 MB/s and write speeds up to 520 MB/s, the drive significantly reduces loading times for applications and files. This performance is enhanced by the integrated SMI controller, which optimizes data transfer and minimizes latency, ensuring seamless multitasking and efficient workflows.

Another noteworthy aspect of the Silicon Image SSD-DXXX(I)-4210 is its endurance and lifespan. Thanks to advanced wear leveling algorithms and error correction technologies, this SSD maintains data integrity even in demanding environments. With an endurance rating of up to 200 terabytes written (TBW), users can rely on the SSD for longevity, making it suitable for intensive applications such as video editing and large database management.

The SSD-DXXX(I)-4210 is built using 3D NAND flash memory, which not only increases storage density but also provides better performance and reliability compared to traditional 2D NAND. This technology allows for higher capacity options while reducing power consumption, resulting in energy-efficient operation. Users can select from multiple storage capacities, catering to various needs, from casual users to data-intensive enterprises.

In terms of connectivity, the SSD supports both SATA III and NVMe interfaces, giving users the flexibility to integrate it into a variety of systems. The SSD-DXXX(I)-4210 is also backwards compatible with older SATA specifications, ensuring broad compatibility across different devices.

Additionally, the SSD-DXXX(I)-4210 comes with built-in thermal throttling technology that protects the drive from overheating during heavy usage. This feature enhances the overall reliability and performance of the drive, making it a safe option for high-demand applications.

In summary, the Silicon Image SSD-DXXX(I)-4210 combines top-tier performance with advanced technologies and reliable features, making it an excellent solution for users looking to enhance their computing experience. With its fast speeds, longevity, and versatile connectivity options, this SSD represents a smart investment for anyone looking to upgrade their storage capabilities.
Top Page Image Contents