Agilent Technologies E4374A Installation, Inspection, Parts and Accessories, 1. Supplied Items

2

Installation

Inspection

When you receive your equipment, inspect it for any obvious damage that may have occurred during shipment. If there is damage, notify the shipping carrier and the nearest Agilent Sales and Support Office immediately. The list of Agilent Technologies Sales and Support Offices is at the back of this guide. Warranty information is printed in the front of this guide.

Until you have checked out the Agilent MCCD, save the shipping carton and packing materials in case the unit has to be returned. If you return the Agilent MCCD for service, attach a tag identifying the model number, serial number, and the owner. Also include a brief description of the problem.

Parts and Accessories

Table 2-1 lists items that are included with your Agilent E4370A/E4374A MCCD.

Table 2-2 lists accessory items that are not included with the Agilent E4370A/E4374A MCCD, but must be purchased separately. Except for the User’s Guide, all of these items are required to make connections from the Agilent MCCD to either the computer, test fixture, or external devices that will be controlled by the Agilent MCCD.

You can either order these items by ordering the appropriate kit, or order them directly from the manufacturer. Table 2-3 lists the addresses of the manufacturers of the connector parts.

Item

Power Cord (1)

Table 2-1. Supplied Items

Part Number	Description
Contact your	A power cord appropriate for your location.
Agilent Sales and
Support office

Item

Table 2-2. Accessories

Manufacturer’s	Description
Part Number

Digital connectors (2)

Calibration connector (1) Auxiliary bias connector (1)

Phoenix MSTB-2.5/10-STF

Phoenix MSTB-2.5/4-ST

10-pin terminal plugs that connect to the digital connectors on the back of the unit.

4-pin terminal plugs that connect to the calibration and auxiliary connectors on the back of the unit.

23