7
C Program Examples
Example 1
This following C program shows you how to implement the example discussed in the beginning of chapter 5 using the API cell forming (cf) functions. The cell forming functions are included with the driver software supplied with the Agilent E4373A documentation package.
#include <stdio.h> #include <mccd.h>
#define SECONDS_PER_MINUTE 60.0f
void setup(CF_HANDLE server);
main()
{
CF_HANDLE server; int err_ret;
char buf[CF_MEAS_LOG_BUFSIZE]; int retcount;
FILE *fp;
CF_READP read_pos;
CF_RUN_STATE presentState;
/* Open the server connection */
if (cfOpen("15.14.248.100", &server, "mypassword")) { printf("Cannot connect to Agilent MCCD\n"); exit(1);
}
/* Reset the server to
/* Set the trigger source to LAN */ cfSetTrigSource(server, CF_LAN);
/* Program the charge/discharge sequence */ setup(server);
/* Initiate sequence and check for sequence consistency */ if (err_ret = cfInitiate(server)) {
printf("Initiate error, code %d\n", err_ret); exit(err_ret);
}
/* Wait for runstate CF_INITIATED. */ do {
Sleep(1000);
cfGetRunState(server, &presentState);
