Agilent Technologies E4370A Manufacturer’s Part Description Number, Manufacturer’s Addresses

2 - Installation

Item

Table 2-2. Accessories (continued)

Manufacturer’s Part	Description
Number

Documentation Package

Serial cable

37-pin

D-sub connector

Connector hood for 37- pin connector

Crimp style contacts for 37-pin connector

Crimp tool for crimp style contacts

Solder style contacts for 37-pin connector

Front Panel Filler Panel

Rack mount Flange Kit

Rack mount Flange Kit with Handles

Agilent E4373A

Agilent 34398A

AMP 205210-2

AMP 749916-2

AMP 66506-9

AMP 58448-2

AMP 66570-2

Agilent p/n 5002-1505

Agilent p/n 5062-3979

Agilent p/n 5062-3985

Contains user documentation, software drivers, and utility programs .

RS-232 null-modem cable for port A or B. (see figure 2-4 for schematic)

Mating connector for Agilent E4374A front panel channel connectors. Eight connectors are required for each Agilent E4374A card. (Connector pins on Agilent E4374A cards are rated at 5 A maximum.)

Eight connector hoods are required for each Agilent E4374A card.

Crimp contact for 37 pin connector

16 contacts are required for each connector. (Pins only accept wires sized 20-24 AWG.)

Hand crimp tool

Crimp contact for 37 pin connector

16 contacts are required for each connector. No tooling is required.

(Pins only accept wires sized 18 AWG.)

One blank filler panel is required for every empty slot in Agilent MCCD mainframes.

Includes 2 flanges, fasteners, and mounting screws

Includes 2 handles, 2 flanges, fasteners, and mounting screws

Table 2-3. Manufacturer’s Addresses

Company

Phoenix Contact

AMP

Agilent Technologies

Address

P.O. Box 4100

Harrisburg, PA 17111-0100

Harrisburg, PA 17111

See list at back of this manual

Contact

Phone:717-944-1300

Fax: 717-944-1625 http://www.phoenixcontact.com/index.html

http://www.amp.com/

http://www.agilent.com/

24