Galaxy H7920 Mobile Router User Manual | Chapter 3: Router Configuration |
|
|
Input user name: “admin” and password: “hongdian”
It will display the main page “Welcome” if it is correct user name and password. Click “Start” button to continue the management.
Click the “Start” button to display main menu.
Galaxy H7920 Mobile Router User Manual | Chapter 3: Router Configuration |
|
|
Main Menu
Router Status: Display major parameters configuration and operation information.
Online Help: Provide online help.
System Tools: Provide a set of tools for the router management, such as modifying password, remote management, profile backup, hardware & software information, log and restart tool.
Network Setting: Provide LAN interface, DHCP, mobile network parameters setting and dynamic DNS configuration.
Route Configuration: Set up NAT, DMZ, envelop filtering and the route paths.
Special Setting: Set up DTU parameters, backup route paths.
Hongdian Products: Browse Hongdian Products catalogue.
Logoff: Exit router management pages.
Notice:
Galaxy router should be configured properly; the “Network Setting” is the basically and necessarily settings. We recommend customer should configure this parameter first. Meanwhile, we suggest customer reads paragraph 3.2.4 before setting.
As mentioned before, the router configuration works should be performed via a PC that is configured. The relative descriptions refer to paragraph 3.1.
Galaxy router factory default setting:
LAN IP Address: 192.168.8.1
Subnet: 255.255.255.0
Login Name: admin
Password: hongdian
You can modify above settings accordingly; and you may need to modify the PC IP address settings if the router settings have been changed.
Press and hold the “RESET” button for 5 seconds to restore the default setting.
Galaxy router is designed for industrial application and it works at dial mode. However, at the beginning step, the router may not be inserted a valid SIM/UIM card or configured incorrectly. The router will try to dial and connect mobile network until establish the communication channel. If it fails 3 tries, the router will restart automatically. It will interrupt your configuration work. Therefore, we recommend set dial mode to “Manual” by clicking
19 | 20 |